Oozing Goo - The Lava Lamp Syndicate

Hello everyone! I'm new to the site but have read a lot of postings in this forum and they have helped a lot.

I have always wanted an #01 white/clear midnight. As you all know they are really hard to find. So I decided to create me own by swapping the liquid from a yellow/clear and a white/blue.

Both lamps functioned fine before the transfer. Now the clear/white just tends to sit as one giant ball in the center of the lamp and doesn't break up much.... snore. On the flip side, the byproduct (yellow/blue) lamp breaks up into tons of little blobs about a nickel in size.

Is there anyway I can get the lava to flow better?? Also, the white is more of a cream color and I would like to get it true white like a sheet of paper. Anyone have any experience with this?? Please help!

See attached pics.

Views: 54

Attachments:

Reply to This

Replies to This Discussion

Thanks for the advice. I will transfer the liquid back to the original globes. Does the sun only bleach out the water or does it bleach out the wax too? And I assume by your post that you have tried turning a white/blue to a white/clear before and it doesn't turn out as good as the white/pink. Only asking cause it might be kinna hard to find that combo in a 32. Your white/clear looks awesome by the way. Even cooler between those two black/clear!!
These were the caps from the globe in question. They read 08-981 1 1106 and 03-950121 0126.
Never thought about the mixture being different like you said. Guess that's prolly the flow problem. One other thing, how do you do a complete transfer? How do you get the wax out without clouding the liquid?

Reply to Discussion

RSS

Support Oozing Goo

By using the eBay button above, you support OG if you purchase anything. Thanks for thinking of us. Mark Goo

© 2020   Created by Mark Goo.   Powered by

Badges  |  Report an Issue  |  Terms of Service