Oozing Goo - The Lava Lamp Syndicate


 I just received my cap replacement for my Century 100 (thank you Duane K!) and am in the process of preparing (i.e., painting) it for install. My original cap was cracked at the top which I believe lead to evaporation since I’ve owned it (about 5 years). I’m assuming it was just water that evaporated so I’m wondering if I can just top it up to the bottom of the cap with distilled water and how high I should fill it. The cap has been cracked like this for at least 5 years. Any help or tips would be appreciated. Here’s a pic of the current level. 

Views: 77

Reply to This

Replies to This Discussion

Yes you can top it up but I can't exactly say whats the maximum. I'm using the bottles for Mathmos lamps of similar design and identical bottle shape so I just put an Astro cap on top and Filled until the gap was gone.

Thanks Arne! Did you just use distilled water?

This label popped out of the cap too when I opened it up. 

Reply to Discussion



Mark Goo created this Ning Network.

Support Oozing Goo

By using the eBay button above, you support OG if you purchase anything. Thanks for thinking of us. Mark Goo

© 2023   Created by Mark Goo.   Powered by

Badges  |  Report an Issue  |  Terms of Service