Oozing Goo - The Lava Lamp Syndicate

How can I tell if the wax of my lava lamp is burned or not? 

Views: 225

Reply to This

Replies to This Discussion

The most obvious sign is that it turns black and stops flowing.

Yeah if it is stuck to the top and sides the bulb could be to hot

If you mean "shot" by "burned", well, if your lava only make some small nuts size blob rapidely, it's shot /dead and couldn't be fixed.

If it's sticking to the side try a few drops of miracle bubbles which is bubble blowing liquid and it should stop sticking

hi kevin - if you would post the information from the cap of the globe and some photos of the problem, it will help us help you!

Great idea Brad

If its stuck to the bottom of the globe.

Quick over heating with no flow or too much flow (stays at the top), runny looking wax with lots of bubbles (takes less then 5 minutes to spike when you turn the lamp on) are all usually a good signs you lamp is done for. Pics definitely help.

Reply to Discussion

RSS

About

Autumn created this Ning Network.

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service