Oozing Goo - The Lava Lamp Syndicate

I run 10 Lava lamps on a Heavy Duty electrical power strip.

I want to add a Dimmer to my lamps,because after they warm up,they get too hot.

Can I buy 1 dimmer cord to plug into the wall outlet,then into the power strip plug to feed all 10 lamps,or should I buy 10 separate dimmer cords?

And which dimmer cord do you guys recommend?

Thank You

Views: 98

Reply to This

Replies to This Discussion

While I have not attempted what you are planning I believe you should be able to pull that off safely. I would suggest a beefy dimmer over the typical selection that tends to be suggested here. I would look at something like this, handles 1,000w out, made for higher powered photo light rigs

Edit: May also want to look at a fused powestrip as well, juuuust in case.

Reply to Discussion

RSS

Support Oozing Goo

By using the eBay button above, you support OG if you purchase anything. Thanks for thinking of us. Mark Goo

© 2020   Created by Mark Goo.   Powered by

Badges  |  Report an Issue  |  Terms of Service