Oozing Goo - The Lava Lamp Syndicate

After I filter a lamp and before I add the master fluid back into the globe, do I need to add SURF to the sides of the globe?

Views: 116

Reply to This

Replies to This Discussion

Are you completely cleaning and scouring out the inside of the bottle?  If so I have always pre-rinsed the inside of the bottle with a surf/distilled water mixture before adding any wax to prevent sticking.  Sometimes it still sticks even then!

If the bottle has just been emptied of old master fluid and the wax never left the bottle and the bottle’s inside walls remain as they were then you can probably get away with just adding back the new master fluid.  

Hope this helps you. 

Critter

Thanks!

Critter said:

Are you completely cleaning and scouring out the inside of the bottle?  If so I have always pre-rinsed the inside of the bottle with a surf/distilled water mixture before adding any wax to prevent sticking.  Sometimes it still sticks even then!

If the bottle has just been emptied of old master fluid and the wax never left the bottle and the bottle’s inside walls remain as they were then you can probably get away with just adding back the new master fluid.  

Hope this helps you. 

Critter

Deepening on how it was filtered, I would suggest adding a drop or two of surf as insurance. Last thing you want is it to stick

Reply to Discussion

RSS

About

Autumn created this Ning Network.

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service