Oozing Goo - The Lava Lamp Syndicate

Hi all just a question has anyone tried to do a good kit lava lamp replacement on a mathmos fireflow bottle  I had a purple one but now it's gone darker more like plum colour 

Views: 209

Reply to This

Replies to This Discussion

Does it flow properly? I've been thinking of making my own fireflow with a 250ml reagent bottle and a custom wire stand, but I've been hesitant because of problems I've read about with the OG fireflows.

I couldn't get my fire-flow to work very well, I switched it to glitter

Hi it flows ok when the room it's in is warm or hot but if it's cold then I use a nightlite tealight which is twice the size of a standard tealight otherwise it flows just like a normal lava lamp 

I used a Yankee Tealight, and even raised it up with some quaters but nothing

I used a nightlife tealight when mine was cold but a standard tealight other times is yours like the rocket one or the cylinder one if it's the cylinder type the room it's in must be hot to use with any good flow 

Claude J said:

I used a Yankee Tealight, and even raised it up with some quaters but nothing

Dont remember

Gave up and Switched it to glitter 

smaller glitter :-( like the little squares that the glitterlites had, maybe i should have waited for the princess refill and gone for the smaller squares for more orig looking

Reply to Discussion

RSS

About

Autumn created this Ning Network.

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service