Oozing Goo - The Lava Lamp Syndicate

It's been three weeks since I made this lamp, and now the wax is sticking to the sides. Why is this happening? I meticulously cleaned the bottle and coated it with surfactant before adding the wax, and this is the result. Is there a way to solve this issue without having to start over again?

Views: 605

Reply to This

Replies to This Discussion

I was going to suggest you do a refill

The flow will be worth it

Make sure your surf is as pure as possible with no additives

Only Glycol is a acceptable additive

This is the flow you're looking for.

To "wash" the goo from excess surf I need boil it with water or only the goo without water?


I just replace the master fluid and only leave enough for a coating on the bottle to refill it

Reply to Discussion


Support Oozing Goo

By using the eBay button above, you support OG if you purchase anything. Thanks for thinking of us. Mark Goo

© 2019   Created by Mark Goo.   Powered by

Badges  |  Report an Issue  |  Terms of Service