Oozing Goo - The Lava Lamp Syndicate

The cord had no switch and the wiring was shoddy on the inside, so the cord was not original - can't use it to date it. 

The strain relief was not correct, and can't be used to date it.

The cord exits very close to the base, which appears the same as early century types.

The base is 2 piece, so that makes it an early version.

No stickers under the cap.

Views: 76

Reply to This

Replies to This Discussion

If it's a 2 piece, it's the 1st version base. Late 60s to 70ish.

4th version. 1st version had no seam at the 'pinch' and a rotary switch on the side. 2nd version had some sort of overheating sensor. Neither has been seen yet. 3rd is 2-piece with a copper finish. 4th is 2-piece with brass finish.

Reply to Discussion

RSS

About

Mark Goo created this Ning Network.

Support Oozing Goo

By using the eBay button above, you support OG if you purchase anything. Thanks for thinking of us. Mark Goo

© 2021   Created by Mark Goo.   Powered by

Badges  |  Report an Issue  |  Terms of Service