Oozing Goo - The Lava Lamp Syndicate

I rewired my shelving units
I ran into a dilemma with wiring the fiber optics to their own remote-controlled power strip.
The heavy 220V power cube, attached to a 220/120 convertor and then into a loaded 8 outlet power strip was too much weight to attach to the back of the shelf unit.

6 glass tiles
Some aluminum angles, flat stock, and 3M double-faced sticky tape, velcro, and plastic sheets.
In retrospect, I could have used one of those expensive aluminum hobby boxes, cut the front and back panels, etc but this only took 2 hrs to cut parts and assemble for less than $10

Views: 90

Reply to This

Replies to This Discussion

That is an awesome solution to the pain in the rear problem of wires and power bricks haha.  If only all of our lamps were wireless.  

Reply to Discussion



Mark Goo created this Ning Network.

Support Oozing Goo

By using the eBay button above, you support OG if you purchase anything. Thanks for thinking of us. Mark Goo

© 2022   Created by Mark Goo.   Powered by

Badges  |  Report an Issue  |  Terms of Service