Oozing Goo - The Lava Lamp Syndicate

Posting here also just in case no one sees my OG post in "problems & questions"

I'm just about ready to start mixin' shit up but I have two mucho importante vital questions. I'm making a 135 oz lava lamp from scratch that I've aptly named ...."THE EXORCIST." I have all my supplies ready to go...All i need to know is the AMOUNT of wax I'm putting in the bottle (i have 4 pounds(white) ready to melt). ALSO...My 2nd dilemma is I am going to make 2 of the 4 pounds of wax red...and leave the remaining 2 pounds white ...and then use them both in the lamp as RED & WHITE...HOW DO I DO THAT? I'M USING RED WAX DYE to color the 1st 2 pounds of wax... Should I wait a certain amount of time between adding the red half and adding the white half?? Will it bleed into my white half...I want them to be separate...ONE ALL WHITE...ONE ALL RED. (but living in the same bottle)

PS - Are Propylene Glycol & Ethylene Glycol...Basically the same?? Can either be used for the "HOLY WATER?"

Thanks in advance for your help,

AJ

Views: 214

Reply to This

Replies to This Discussion

THE POWER OF CHRIST COMPELS YOU!


From one custom lava lamp goo-head creator to another, Cool ass project!

That is a devilish concept, now kindly undo my straps!

Unfortunately, if you put both color waxes into the lamp, they will eventually mix to a 50% lighter shade of red.

If the top opening is uniform with the diameter of the entire globe (A tube), Perhaps there is a way of making a sheet of glass divider and "Carefully" installing it with a thin bead of silicone so the two different colors stay separated.>?

Put red on one side and white on the other?

Or

A smaller globe inserted into the larger one?


Volume is a state of mind and conceptual, I always like to turn the volume knob up to 11  for better flow and also add extra springs for heat conduction. Just make sure you can dial up the heat enough.

Ethylene and propylene

I use propylene

the difference?

Safety and boiling point

See here: http://www.differencebetween.com/difference-between-ethylene-and-vs...

Would you like some bourbon in that, father?

THE POWER OF THE OOZE COMPELS YOU  !!!!....THE POWER OF THE OOZE COMPELS YOU !!!!.......

thanks ...too bad can't use split-pea soup as brine  lol...So My original question...OUT OF 4 POUNDS ...HOW MUCH WAX SHOULD I USE FOR A 130 OZ BOTTLE?

PS....."YOUR MOTHER MAKES LAMPS IN HELL !!!"  lol

Claude J said:

THE POWER OF CHRIST COMPELS YOU!


From one custom lava lamp goo-head creator to another, Cool ass project!

That is a devilish concept, now kindly undo my straps!

Unfortunately, if you put both color waxes into the lamp, they will eventually mix to a 50% lighter shade of red.

If the top opening is uniform with the diameter of the entire globe (A tube), Perhaps there is a way of making a sheet of glass divider and "Carefully" installing it with a thin bead of silicone so the two different colors stay separated.>?

Put red on one side and white on the other?

Or

A smaller globe inserted into the larger one?


Volume is a state of mind and conceptual, I always like to turn the volume knob up to 11  for better flow and also add extra springs for heat conduction. Just make sure you can dial up the heat enough.

Ethylene and propylene

I use propylene

the difference?

Safety and boiling point

See here: http://www.differencebetween.com/difference-between-ethylene-and-vs...

Would you like some bourbon in that, father?

Maybe like a sherbert or sorbet streaking like effect would happen?? that could be cool. Are you sure they will just blend into bland?

good...i got the PROP.....IT BURNS !!!!!!!!!!!!

Claude J said:

THE POWER OF CHRIST COMPELS YOU!


From one custom lava lamp goo-head creator to another, Cool ass project!

That is a devilish concept, now kindly undo my straps!

Unfortunately, if you put both color waxes into the lamp, they will eventually mix to a 50% lighter shade of red.

If the top opening is uniform with the diameter of the entire globe (A tube), Perhaps there is a way of making a sheet of glass divider and "Carefully" installing it with a thin bead of silicone so the two different colors stay separated.>?

Put red on one side and white on the other?

Or

A smaller globe inserted into the larger one?


Volume is a state of mind and conceptual, I always like to turn the volume knob up to 11  for better flow and also add extra springs for heat conduction. Just make sure you can dial up the heat enough.

Ethylene and propylene

I use propylene

the difference?

Safety and boiling point

See here: http://www.differencebetween.com/difference-between-ethylene-and-vs...

Would you like some bourbon in that, father?

naw it will end up looking like regurgitated Italian food 

I need to see the donor vessel from satan but I would say @ 2" is s good start as long as you have enough springs and hot enough fire and brimstone to heat it

dimi.jpgLILDIMI.jpgFilm-The-Exorcist.jpg

Claude J said:

THE POWER OF CHRIST COMPELS YOU!


From one custom lava lamp goo-head creator to another, Cool ass project!

That is a devilish concept, now kindly undo my straps!

Unfortunately, if you put both color waxes into the lamp, they will eventually mix to a 50% lighter shade of red.

If the top opening is uniform with the diameter of the entire globe (A tube), Perhaps there is a way of making a sheet of glass divider and "Carefully" installing it with a thin bead of silicone so the two different colors stay separated.>?

Put red on one side and white on the other?

Or

A smaller globe inserted into the larger one?


Volume is a state of mind and conceptual, I always like to turn the volume knob up to 11  for better flow and also add extra springs for heat conduction. Just make sure you can dial up the heat enough.

Ethylene and propylene

I use propylene

the difference?

Safety and boiling point

See here: http://www.differencebetween.com/difference-between-ethylene-and-vs...

Would you like some bourbon in that, father?

What wax are you using if not a goo kit? I tried canning wax a week ago for shits n giggles, with surf and distilled water, it was a bust. The wax was nice would have made a nice lamp if it worked.

Reply to Discussion

RSS

About

Autumn created this Ning Network.

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service