Oozing Goo - The Lava Lamp Syndicate

Springs or Screens that is the question ? I am ready to goo just dont know ?

Hello all,

 

I am going to goo kit my grande I have everything I need I just want to know whats the best to do. I have the screen they give you with the kit. Has anyone used the screens ? Do they work as well as springs ? Anything I should know on how to set it up ? Or would it be better to use a spring ? Any ideas on where to get and what to get if springs are better ?

 

Thanks in advance.

Robert

Views: 196

Reply to This

Replies to This Discussion

I think most prefer the spring to the screen.  As to where to buy, please check the following.  http://oozinggoo.ning.com/forum/topics/china-lamp-replace-the-coil
I didn't even know how to use the screen, and the kit didn't include instructions for the screen. My vote: coil.

I use my own springs :)

They are 1m long and has a diameter of 15mm. They work very well.

Where did you buy the 1 meter long springs?  Are they stainless steel?

In Germany. Of course, they are stainless steel :)

http://www.schweizer-federn.de/

where can find then in usa?

and how do you connect? With a cut piece of solid stainless rod which would go on the inside of spring and solder ? or weld?

Reply to Discussion

RSS

Support Oozing Goo

By using the eBay button above, you support OG if you purchase anything. Thanks for thinking of us. Mark Goo

© 2019   Created by Mark Goo.   Powered by

Badges  |  Report an Issue  |  Terms of Service