Hey everyone! Long time no see. So I have had a Colossus sitting empty in my house for a few years now after it wouldn't flow when I put a Gookit in it. I finally decided it was a shame to keep it in its sorry state.
For a quick recap of the original project you can check out this uploaded picture and read the comments.
I started this project with a call to the fine people at Magma Tower to get some advice on what went wrong when I originally tried this out. I emptied the water out most of the way to make it easier to move the lamp since I had moved a few times over the years. It turns out if you want to store their goo they suggest you store it dry so the water doesn't leech chemicals out of the wax. I was also told that chemicals can be left over from the original lamp contents that will stop the lamp from flowing. I also found out that even residue left on the cap can stop the flow once the cap starts to drip from the humidity. Finally I got the prescription for the lamp.
Scrape the top layer of wax off because it likely will have issues due to chemical leeching.
Wash it out with surfactant. 2oz should do.
Buy a 16oz bottle of surfactant and 8-9 gallons of distilled water.
Refill the lamp, add the surfactant, see if it flows.
Some stats for others going down this route.
I originally ordered 4 quarts of goo. I asked if that may have been my issue and I was told no, but it will have less wax at the bottom. I may end up having to buy 4 more quarts to reach. This kind of throws off the calculations slightly, but shouldn't effect anything.
I should have my surfactant next week, but I'll be out of state for a business trip. I'll update this post when I get back.
Anyways... picture time.
Well after thinking about it more, considering how much I had to use with vintage wax and a grande, that amount may be about right.
that bottle i sent you might be the drop in the ocean as far as size, but at least you have some to use in other lamps/
Suggestion: Id shut that off and let that puppy cool down until the goo settles.