Wax won't stick to coil?
This is how I did it
1 - Drain original liquid and save it for later. (Use a clean container for it)
2 - After liquid is removed heat the wax on the Lava Lamp base.
3 - After wax melt remove the coil with a hook
4 - Clean the coil with hot water and dish soap, gently
5 - Dry the coil and use break-cleaner to degrease it completely.
6 - With wax melted put the coil inside.
7 - Let the wax cool down! This is important.
8 - Put the original liquid on the Lava Lamp and close it.
9 - Turn it on!
Done!
Your Lava Lamp should be great after this steps
Tags:
By using the eBay button above, you support OG if you purchase anything. Thanks for thinking of us. Mark Goo
1 |
Mattgyver92 |
2 |
itsblue |
3 |
KittenChops |
4 |
Claude J |
5 |
Jsmooth |
6 |
Purplicious |
7 |
tim |
8 |
Paul |
© 2022 Created by Mark Goo.
Powered by