Oozing Goo - The Lava Lamp Syndicate

So I have 2 Florence glitters I’m trying to restore. They’re in very rough shape, switches are shot, don’t yet know if sockets are good. Can anyone tell me what bulb these lamps get? I’ve looked everywhere and all I could find was that the mini version of this gets a 10W bulb. I think this was called the “Astrolite” but I’m not sure. Thanks!!!

Views: 91


You need to be a member of Oozing Goo - The Lava Lamp Syndicate to add comments!

Join Oozing Goo - The Lava Lamp Syndicate

Comment by Claude J on November 17, 2018 at 5:58am

Id send them out to be replated brass/copper at this stage-At the very least - polished

you can also open the hole a tad and use a larger HESCO fastener

Let me know if you need any-I have various sizes in stock

Comment by Claude J on November 17, 2018 at 5:54am
Comment by CrunchyCanadian on November 16, 2018 at 4:49am

I think red. I’m having trouble finding the proper cord width to replace the lamp cords. All the cords they sell today are significantly thicker (and uglier) and don’t fit into the black plastic cord bushing that fits into the lamp. This is going to take me longer than I thought...

Comment by Jonas Clark-Elliott on November 16, 2018 at 1:36am

Yes, Astro-Lite is the name, and 10 or 15 watt bulbs go in them. I hope they turn out well. What colors are they?

Comment by CrunchyCanadian on October 25, 2018 at 11:43am

Thank you Erin! I couldn’t find that info anywhere. Was about to use a 25W. I hope I can get these to work - they look really cool. 

Comment by Erin on October 25, 2018 at 10:18am

Should be 15W or 10W.

Comment by Modulo '70 on October 24, 2018 at 5:55pm

I think these are the single cylinder Astro-Lites. They will have a very low wattage bulb. Good luck with the restoration.

Support Oozing Goo

By using the eBay button above, you support OG if you purchase anything. Thanks for thinking of us. Mark Goo

© 2019   Created by Mark Goo.   Powered by

Badges  |  Report an Issue  |  Terms of Service