1 |
Angel |
2 |
Not A Speck Of Cereal |
3 |
Kirk |
4 |
Jake Thomas |
5 |
Modulo '70 |
6 |
Bob Scran |
7 |
Claude J |
8 |
Autumn |
61 members
19 members
21 members
48 members
9 members
21 members
7 members
39 members
124 members
28 members
© 2024 Created by Autumn. Powered by
Comment Wall (2 comments)
You need to be a member of Oozing Goo - The Lava Lamp Syndicate to add comments!
Join Oozing Goo - The Lava Lamp Syndicate
The clear/yellows came with the blue base. They had a coil problem with them. I had about 6 of them for use on project lamps and 2 had bad coils
make sure your coin is flat on the bottom closest to the light.
Take out the 40 watt bulb and use a 60 watt bulb to get it going. Run for short run times so you don't burn it out \(the wax will turn on you) .Once you get it going a few times put the 40 back in it.
This was Reply by Ninjutsu SmurfL
There are a few Tutorials that I wrote that will help you create Goo and MasterFluid. There is a gap or two that is filled in by looking over: http://www.moltenmeditation.com/lava.htm. Check it out,
Let me know if this helped.
I have a friend that lives in Cratersville. I have been to the McDonalds just off I-75 many times.