Oozing Goo - The Lava Lamp Syndicate

Autumn's Comments

Comment Wall (43 comments)

You need to be a member of Oozing Goo - The Lava Lamp Syndicate to add comments!

Join Oozing Goo - The Lava Lamp Syndicate

At 2:05pm on October 24, 2020, Michael Eskin said…

I was able to fix the bubbles in mine using the procedure in this post:

This worked perfectly for me!

Sgt Pepper said:

I have a way. You run the lamp once. as it cools down the wax will solidify, if you time it right the wax will be solid inside and goey outside and on the top where most of the bubbles are. Well get the globe and twirl it one way then quickly turn the other way and keep going that way. Repeat this multiple times. You will notice the top of the bubbles pop or the top gets pulled off. Now start up your lamp and see how it is. There will be less bubbles. Do this again and again. If they come back do it more, eventualy they stay gone. Hope this helps you

It is crucial not to shake the wax, just get it to flow on the bottom to get the bubbles to consolidate. I also was able, once they consolidated into just a few large bubbles, to reach down and pop them with a stainless steel skewer to hasten the process.
At 11:20am on August 19, 2020, Robert Israel said…

How did you remove and recap the pyramid lava lamp? I need help

At 7:09am on July 15, 2020, Damion Salazar said…

Hi love the starship grande you have. Wanted to know if you would sale it? If so could you let me know your price? I really just want to top cone and bottom base. Please let me know. PayPal ready if so.

At 6:53am on November 10, 2019, Grum said…

I  "MAY"  have a solution to your bubble problem , I am testing it at the moment and it showing some promise. 

       GRUM 

At 5:47am on February 8, 2016, andy ross said…

Hi Autumn, from across the pond... sorry to trouble you, but that old "for sale" thread reminded me that you once showed a Glitter Graphic - I'm a private collector and would love to find some! Please advise if you can help? Many thanks, and kind regards, Andy

At 12:18am on September 10, 2015, MIKKI MCGLONE said…

do you still have the kenny base ?

At 4:54pm on September 2, 2014, Autumn said…
Sorry, but I dropped the project a long time ago. The there are several different formula on this site you can experiment with though. If you have any questions you can send me a private message. http://www.oozinggoo.com/howto.html
At 2:12pm on September 2, 2014, georgia charalambous said…

Hello Autum, i was willing to know wether you eventually figured out the original lava lite formula? I really need to know i need it for an important project for school. :)

At 5:33pm on August 20, 2014, Autumn said…

If you emailed me back you used the wrong email because I never got it. I still have stuff for sale, but I have not been motivated to sell anything because I am lazy.

At 2:49pm on May 27, 2013, Deb said…

That's a great profile pic! :)

At 3:32pm on April 7, 2013, Markus said…

Hi Autumn,

about the "Bubbly Wax" issue, take a look here: http://oozinggoo.ning.com/forum/topics/whats-the-best-way-to-debubble

Markus.

At 2:11pm on March 11, 2013, Turtlecross said…

Thanks for the add Autumn!

At 12:16am on October 1, 2012, Loren said…

Your new av is beautiful! :)

At 11:37pm on August 16, 2012, Jus said…

Thank you for the red ribbon!

At 4:03pm on July 2, 2012, frank Chillino said…

Hey Autumn, I spoke to Erin She told me to ask you, I have a Regency Lava that needs a Goo kit inside, it is an empty bottle. Are you interested in doing this for me? or can you tell me some one that would? I will pay to have this done properly. Thanks for your help!! Frank

About

Autumn created this Ning Network.

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service