first , ty for accepting me into your community.ive been browsing the forums for a couple weeks now trying to find a solution.; the wax in my century just melts and sits motionless.ive tried reducing…Continue
"Trail error success and a lot of research is how I learnedDoes the lamp have a heat ring?
If it does, Try adding PG a little at a time Wait between additions to the fluid so the master fluid regains its operating temperature"
"from the last video i posted where i had a little movement, i changed nothing. the master fluid was poured out and saved, and replaced as is. when i coated the bottle with surf, drained everything out, did not rinse it.
"i notices wax started sticking, so i took the steps to coat it with sls too prevent sticking, refilled with the master fluid and now im back to the wax melting but not rising. could that amount of sls left on the bottle have caused…"
"you have to have an understanding of what the components of wax and master fluid do, before blindly mixing them. t
There is a wealth of info on here if you look hard enough, that will guide you through the process"
"i have also been sidetracked lately as i picked up a box of lava lamp parts for $20. the glitter lamps all work fine. most of the globes work ok, a few need major attention. i need to go through and identify all the pieces and parts, as they…"
"i did a fluid change as Claude J suggested. i was getting no movement at all, so i increased the glycol amount slightly, and here is where im at. I have not added SLS, i need to order some. the movement in the video is not…"
"Ty for the info. The room temp is good, basement room away fro windows or vents and a couple new bulbs were tried. I thought I had read numerous places of using a salt mixture. I’ll get the right stuff and do a fluid change"
My name is Mr. Simon Page, I have contacted you before without any response from you. Please replied if you receive this message. I have something very important to discuss with you, I have a vital information to give you. Could you please get back to me on (email@example.com) for full details.