Oozing Goo - The Lava Lamp Syndicate

First background on the lamp. I bought this century about a year ago cloudy and very sticky. I cycled it  first to clear it and then dumped everything after and used degreaser for the sticking. Now it flows and is beautiful, except for on thing. It goes into a state similar to an egg except it is on one side. I have done the method where you spin the lamp and it makes it flow for a few minutes but goes back to the bad egg. It is not the bulb because i have tried frosted, semi frosted, and clear 40 and even a 60 clear. I think its the coil but i would love some reassurance before opening the lamp.

Views: 294

Reply to This

Replies to This Discussion

Seems like a sticking problem to me still. Looks like some slight sticking is causing the wax to flow towards that area where it is building up.
The problem ... It's not a Mathmos.. Lol ;-)

whenever i twirl it I don't see any wax that is stuck to the sides.

Critter said:

Seems like a sticking problem to me still. Looks like some slight sticking is causing the wax to flow towards that area where it is building up.

ok, its not sticking

sorry for the triple post, but.... I did a coil swap and its flowing better but time will tell if it returns.

Kempton said:

ok, its not sticking

Reply to Discussion

RSS

About

Autumn created this Ning Network.

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service