Oozing Goo - The Lava Lamp Syndicate

Looking for a Gold Aristocrat cap, anyone have one or even an empty bottle with the cap?  Thanks!

Views: 335

Reply to This

Replies to This Discussion

If you can't find a genuine one you can buy a 3d printed replacement 

http://oozinggoo.ning.com/forum/topics/replacement-screw-cap-plans-...

And I just wanted to be sure that this is an Aristocrat, correct?  

Yes that is an Aristocrat.  The globe also fits a Century base.  Aristocrat and Century globes are identical.

Jason Slocum said:

And I just wanted to be sure that this is an Aristocrat, correct?  

Would you know if this cap would work?  Or would this bottle have the bottle cap at the end of the bottle?

That would be the correct cap, as long as it is in good condition.  There is a groove for an O-ring in the cap so be sure that is in place and you should have no problems.

Ok, thanks so much!  It’s local and a pretty good price, I think I’ll grab it.  Thanks again for the info

AEB5172F-CCEF-4E2E-9AEF-23E26393871C.jpeg

Picked it up today, works nicely.  Cap doesn’t want to come off.  Thought maybe getting it warm would loosen it up? 

If it works fine then and there's no reason to open it then don't. Not worth risking breaking the cap. 

Warming may help but the main thing is just steady, even pressure.  The O-ring that seals the globe causes the cap to stick in place instead of turnig easily.  They quit making those screw on globes in the early 90's so it's been on there for over 35 years.  Don't use any tools except maybe something like this 



Jason Slocum said:

AEB5172F-CCEF-4E2E-9AEF-23E26393871C.jpeg

Picked it up today, works nicely.  Cap doesn’t want to come off.  Thought maybe getting it warm would loosen it up? 

Reply to Discussion

RSS

About

Autumn created this Ning Network.

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service