Oozing Goo - The Lava Lamp Syndicate

I bought a century lamp online about a year ago and knew that the cap was cracked and glued together... Well I guess I should have asked more questions or given this more thought, because when it arrived I realized the seller had glued the cap to the globe.

I would like to dump the contents, get a replacement cap and possibly paint the base. 

So anyone know how I can get this cap off the globe?

I do not care if it isn't salvageable!

Views: 88

Reply to This

Replies to This Discussion

If you don't care about the cap breaking, then maybe try drilling a hole in the top. (If it has glue on the glass threads maybe it's too hard to crack / chip off the plastic without damaging the globe or threads.) After drilling a hole in top and replacing contents, You would have to replug it with something (flush with the top) and epoxy it or something. Then use another decorative cap over it. As long as the plug was pretty flat, a decorative metal cap could cover it. I have never tried this, just an idea!

Thank you for replying Galaxy 9! I appreciate all your shared knowledge and ideas!

It is a great idea!

The lamp has been sitting in my closet for about a year now. Of course on top of the cracked cap it got pretty shook up in shipment.


Galaxy_9 said:

If you don't care about the cap breaking, then maybe try drilling a hole in the top. (If it has glue on the glass threads maybe it's too hard to crack / chip off the plastic without damaging the globe or threads.) After drilling a hole in top and replacing contents, You would have to replug it with something (flush with the top) and epoxy it or something. Then use another decorative cap over it. As long as the plug was pretty flat, a decorative metal cap could cover it. I have never tried this, just an idea!

Time to break out the dremel tool.

It is looking that way, huh?


Mr MaGoo said:

Time to break out the dremel tool.

Yes the Dremmel;l with cutoff wheel



Mr MaGoo said:

Time to break out the dremel tool.

Get a strap wrench

https://www.google.com/search?biw=1600&bih=758&tbm=isch&...

or a jar opener

https://www.google.com/search?q=jar+opener&source=lnms&tbm=...

apply heat with a blow-dryer and then use the tool.  The heat "MAY" loosen the glue (don't touch the hot surface!).  If you are successful you may still have glue residue to clean up.

Or you could clean out a bottle-cap globe and transfer the contents of the classic globe to it.


order replacement caps here:https://www.shapeways.com/product/4TJ6AR66D/lava-cap-for-70-s-quot-...
Claude J said:

Yes the Dremmel;l with cutoff wheel



Mr MaGoo said:

Time to break out the dremel tool.

I appreciate everyone's ideas! I'll let you guys know how it goes!

Reply to Discussion

RSS

About

Autumn created this Ning Network.

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service