Dropped my 52oz lamp... - Oozing Goo - The Lava Lamp Syndicate2024-03-28T15:58:51Zhttps://oozinggoo.ning.com/forum/topics/dropped-my-52oz-lamp?feed=yes&xn_auth=noIts fine now, I let it run ov…tag:oozinggoo.ning.com,2009-06-07:1566398:Comment:986232009-06-07T18:27:41.175ZJimmyhttps://oozinggoo.ning.com/profile/Jimmy10
Its fine now, I let it run over night. Its like new again.<br />
Thanks Everyone
Its fine now, I let it run over night. Its like new again.<br />
Thanks Everyone No leak - your fine. :)tag:oozinggoo.ning.com,2009-06-07:1566398:Comment:985022009-06-07T01:03:54.057ZKrishttps://oozinggoo.ning.com/profile/Kris
No leak - your fine. :)
No leak - your fine. :) ok, so I held the lamp upside…tag:oozinggoo.ning.com,2009-06-07:1566398:Comment:984862009-06-07T00:00:55.905ZJimmyhttps://oozinggoo.ning.com/profile/Jimmy10
ok, so I held the lamp upside down and it stayed dry. So there isnt any risk just turning it on and pretending the cap didnt come loose?
ok, so I held the lamp upside down and it stayed dry. So there isnt any risk just turning it on and pretending the cap didnt come loose? Crimping should always be don…tag:oozinggoo.ning.com,2009-06-06:1566398:Comment:984222009-06-06T20:17:29.380ZKrishttps://oozinggoo.ning.com/profile/Kris
Crimping should always be done COLD. I would try to find a capper to seal it up proper. What you are going to wind up doing is apply pressure to one area and it's going to make the opposite sides expand out. That's why a capper is recommended. It will apply equal pressure all around at the same time. This will give you a permanent seal.
Crimping should always be done COLD. I would try to find a capper to seal it up proper. What you are going to wind up doing is apply pressure to one area and it's going to make the opposite sides expand out. That's why a capper is recommended. It will apply equal pressure all around at the same time. This will give you a permanent seal.