Oozing Goo - The Lava Lamp Syndicate

AC 24v 25w Electronic Lava Lamp 41.5cl

I evaluated the bottles, canisters and broken rgb led bulb to be thrown with the PWM rgb led driver I made before.

First I painted with primer, I opened the holes.

I assembled the parts.

Working principle:

24v AC for safety

White light mode and color light mode (Red, orange, yellow, green, blue, dark blue, purple, fuchsia and full spectrum rainbow)

After assembling and testing.

https://youtu.be/G0Xa_PZmioc

The system works well.

Now is the time to try with the lamp. (LEFT SIDE)

And start 13:45

14:00

14:15

14:30

14:30 Link to the video

https://youtu.be/PCf6DtqwD-o

14:45

15:00

16:00

17:00

18:00

Approximately 6 hours later

20:00

Now it is getting dark.

RED

DARK BLUE

YELLOW

FUCHSIA

White color formed by red, blue and green leds together.

RGB-WHITE (It is very different from normal white led.) (Cool white)

BLUE

ORANGE

PURPLE

WHITE (Warm white)

This is its study video.

Made of waste material AC 24v 25w Electronic Lava Lamp 41.5cl

https://youtu.be/yq10qanZUZE

Views: 317

Reply to This

Replies to This Discussion

This is so cool bro, thanks for sharing!  Video is great as well.  What original color wax are you using and where did you get it or what recipe did you use.  Thanks again for all the info!

MaGoo!

Thanks for your good wishes, I used natural materials (Rain water, epsom salt, Saponin,  beeswax and linseed oil, Pine Turpentine in this work. The color of the wax (beeswax) is yellow.

 

Oil Part (Wax content)

Wax = Beeswax 22,5 grams (yellow)

Oil = Linseed oil, 20 grams (yellow)

Diluent = Pine Turpentine 5 grams

PERC = 30 grams

 

Water Part

Water = Rainwater 300ml

Surfactant = Saponin (saturated solution) 3-5 drops

Density-increasing = Magnesium Sulfate (saturated solution) 20ml

 

I bought wax (beeswax) from my own country. https://www.gittigidiyor.com/arama/?k=balmumu

 

 

I have attached an ebay link for you.

https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&am...



Mr MaGoo said:

This is so cool bro, thanks for sharing!  Video is great as well.  What original color wax are you using and where did you get it or what recipe did you use.  Thanks again for all the info!

MaGoo!

This link also shows how it works with normal bulbs.

https://www.facebook.com/groups/497181480659555/permalink/110070131...



Mr MaGoo said:

This is so cool bro, thanks for sharing!  Video is great as well.  What original color wax are you using and where did you get it or what recipe did you use.  Thanks again for all the info!

MaGoo!

Hi...i am using the Astro bottle in my Lava lamp. Bottles are now supplied with a lip that runs around the lower part of the bottle, to ensure it will sit straight in the base.  When the bottle is placed on the base, it should sit securely, although it will still be possible to move the bottle from side to side.

Reply to Discussion

RSS

About

Autumn created this Ning Network.

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service