Goo-Kit Refurbishing & Streaking - Oozing Goo - The Lava Lamp Syndicate2024-03-28T10:33:27Zhttps://oozinggoo.ning.com/forum/topics/goo-kit-refurbishing-streaking?commentId=1566398%3AComment%3A846940&xg_source=activity&feed=yes&xn_auth=noGood to know.
Having read tha…tag:oozinggoo.ning.com,2021-07-06:1566398:Comment:8469412021-07-06T23:51:17.715ZPeter Whttps://oozinggoo.ning.com/profile/PeterWolverton
<p>Good to know.</p>
<p>Having read that many others use it or other forms of acetone as a detergent, and seeing this dudes video.</p>
<p><a href="https://www.youtube.com/watch?v=eSlDnEEYSgU&ab_channel=JamesRimmer" target="_blank">https://www.youtube.com/watch?v=eSlDnEEYSgU&ab_channel=JamesRimmer</a></p>
<p></p>
<p>Good to know.</p>
<p>Having read that many others use it or other forms of acetone as a detergent, and seeing this dudes video.</p>
<p><a href="https://www.youtube.com/watch?v=eSlDnEEYSgU&ab_channel=JamesRimmer" target="_blank">https://www.youtube.com/watch?v=eSlDnEEYSgU&ab_channel=JamesRimmer</a></p>
<p></p> If you desire to thoroughly c…tag:oozinggoo.ning.com,2021-07-06:1566398:Comment:8469402021-07-06T23:10:59.290ZClaude Jhttps://oozinggoo.ning.com/profile/ClaudeJohnson
<p>If you desire to thoroughly clean the bottles, ..<br></br>After cleaning the bottles with DAWN, Clean the bottles with SULFURIC acid, rinse well, and add SURF<br></br>(WEAR PROTECTIVE GEAR)</p>
<p>Perhaps try a different brand of SURF as this one is apparently clouding the bottles<br></br>Go to chemistry connection and get a quart, it will last you a long time</p>
<p><br></br>As far as I'm concerned, The ML amount is just a general reference.<br></br>I'm willing to bet MT goo buys their SURF in a gel form as I…</p>
<p>If you desire to thoroughly clean the bottles, ..<br/>After cleaning the bottles with DAWN, Clean the bottles with SULFURIC acid, rinse well, and add SURF<br/>(WEAR PROTECTIVE GEAR)</p>
<p>Perhaps try a different brand of SURF as this one is apparently clouding the bottles<br/>Go to chemistry connection and get a quart, it will last you a long time</p>
<p><br/>As far as I'm concerned, The ML amount is just a general reference.<br/>I'm willing to bet MT goo buys their SURF in a gel form as I do from chemistry connection and dilutes it for resale (as it comes in with less viscosity in a gel form)<br/>(The amount they dilute with water would directly affect the amount you add )</p>
<p><br/>I just coat the bottle with lightly diluted SURF, toss the rest back into its storage bottle, and add molten goo, then adjust accordingly (if at all) when it is flowing</p>
<p>Brakecleen is ONLY used to adjust the specific gravity/density of the old school goo recipe</p>
<p>Not sure how you got the idea to use it to clean the bottle??<br/><br/></p>
<p>See other topics on the forum for reverse-engineering the was the formula that Autumn has been posting</p>
<p></p>
<p></p> No. There are no blobs of lav…tag:oozinggoo.ning.com,2021-07-06:1566398:Comment:8469352021-07-06T21:50:03.023ZPeter Whttps://oozinggoo.ning.com/profile/PeterWolverton
<p>No. There are no blobs of lava stuck to either of the bottles. It's a milky white film that seems to happen when the lava heats up and is still semi-solid, rising, sliding along the globe and making the expected rocky formations before fully heated.</p>
<p>No. I always coat the bottle with SURF before adding goo, and I melt the goo in a double boiler at a simmer so not to damage it.</p>
<p>Well I've never had a problem with using Brakleen initially after the first dish soap scrub, and then…</p>
<p>No. There are no blobs of lava stuck to either of the bottles. It's a milky white film that seems to happen when the lava heats up and is still semi-solid, rising, sliding along the globe and making the expected rocky formations before fully heated.</p>
<p>No. I always coat the bottle with SURF before adding goo, and I melt the goo in a double boiler at a simmer so not to damage it.</p>
<p>Well I've never had a problem with using Brakleen initially after the first dish soap scrub, and then boil bath and soap scrub 2-3 more times with hot water rinse in-between each soap scrub, then a hot distilled rinse and then surf coating after cooldown. Why should you not use Brakleen to clean the bottle? and I didn't know Brakleen could be used to increase the density...</p>
<p>Thank you for the PDF link. Some new info. Surf ratios are a little higher than what I've done before for 32oz and 52oz. I've always been very meticulous in my ratios with respect to water/goo amounts. MT directions for surf ratio is the only part I've followed from their pamphlet, but I think I'll start going a little higher with surf. Not having enough surf could be the culprit here, and maybe its not doing its job in isolating the lava, But every 20oz I refurbish has been 5ml SURF.</p>
<p>I've attached a picture of a 20oz, and the 52oz tweaked with added goo and surf which now has that nice classic flow. Those tiny dots are air bubbles, there is no wax stuck to either of those bottles. (hoping they upload...)</p>
<p>Why my 52oz has this same streaking just doesn't make any sense. It having been out of the box pristine and only tweaked with added goo and surf, and some original water removed via a clean 10ml syringe-like pump. That's what has led me to believe its something in the MT goo.</p> When you say streaked are you…tag:oozinggoo.ning.com,2021-07-05:1566398:Comment:8467442021-07-05T07:49:27.201ZClaude Jhttps://oozinggoo.ning.com/profile/ClaudeJohnson
<p>When you say streaked are you referring to lava stuck to the bottle?</p>
<p>Are you forgetting to coat the bottle with SURF prior to adding the goo?</p>
<p>You should NOT use break keen to clean the bottle. <br></br>It is ONLY used to increase the density of the wax by directly mixing it into the wax when hot for that classic flow</p>
<p><br></br>I've attached a PDF tutorial I made for the correct process for restoring/reloading globes…<br></br><br></br></p>
<p>When you say streaked are you referring to lava stuck to the bottle?</p>
<p>Are you forgetting to coat the bottle with SURF prior to adding the goo?</p>
<p>You should NOT use break keen to clean the bottle. <br/>It is ONLY used to increase the density of the wax by directly mixing it into the wax when hot for that classic flow</p>
<p><br/>I've attached a PDF tutorial I made for the correct process for restoring/reloading globes<br/><br/><a href="https://storage.ning.com/topology/rest/1.0/file/get/9203417695?profile=original" target="_blank" rel="noopener">REFURBISHING%20A%20GLOBE.pdf</a></p>