How to unstuck a crestworth cap from the bottle - Oozing Goo - The Lava Lamp Syndicate2024-03-29T10:25:43Zhttps://oozinggoo.ning.com/forum/topics/how-to-unstuck-a-crestworth-cap-from-the-bottle?feed=yes&xn_auth=noon some it is possible on oth…tag:oozinggoo.ning.com,2012-11-01:1566398:Comment:4221132012-11-01T18:20:41.156Zpascalhttps://oozinggoo.ning.com/profile/pascalperret
<p>on some it is possible on other not.</p>
<p>the best result I had was with boiling water (didn't try hairdryer) but it can slightly damage the metal cap if it is too hot</p>
<p><br></br> <cite>Astralav said:</cite></p>
<blockquote cite="http://oozinggoo.ning.com/forum/topics/how-to-unstuck-a-crestworth-cap-from-the-bottle?commentId=1566398%3AComment%3A421853&xg_source=msg_com_forum#1566398Comment421853"><div><div class="xg_user_generated"><p>Same problem here with Cosmos and Nordic:</p>
<p>I…</p>
</div>
</div>
</blockquote>
<p>on some it is possible on other not.</p>
<p>the best result I had was with boiling water (didn't try hairdryer) but it can slightly damage the metal cap if it is too hot</p>
<p><br/> <cite>Astralav said:</cite></p>
<blockquote cite="http://oozinggoo.ning.com/forum/topics/how-to-unstuck-a-crestworth-cap-from-the-bottle?commentId=1566398%3AComment%3A421853&xg_source=msg_com_forum#1566398Comment421853"><div><div class="xg_user_generated"><p>Same problem here with Cosmos and Nordic:</p>
<p>I can unscrew the metal cap with the T plastic cap, but I would like to split the metal part from the plastic one.</p>
<p>There is a lot of glue between them.</p>
</div>
</div>
</blockquote> Same problem here with Cosmos…tag:oozinggoo.ning.com,2012-11-01:1566398:Comment:4218532012-11-01T17:31:51.406ZAstralavhttps://oozinggoo.ning.com/profile/Astralav
<p>Same problem here with Cosmos and Nordic:</p>
<p>I can unscrew the metal cap with the T plastic cap, but I would like to split the metal part from the plastic one.</p>
<p>There is a lot of glue between them.</p>
<p>Same problem here with Cosmos and Nordic:</p>
<p>I can unscrew the metal cap with the T plastic cap, but I would like to split the metal part from the plastic one.</p>
<p>There is a lot of glue between them.</p> thank's for your answers I wi…tag:oozinggoo.ning.com,2012-01-31:1566398:Comment:3701892012-01-31T12:53:08.403Zpascalhttps://oozinggoo.ning.com/profile/pascalperret
<p>thank's for your answers I will let you know</p>
<p>thank's for your answers I will let you know</p> I've removed a few stuck caps…tag:oozinggoo.ning.com,2012-01-30:1566398:Comment:3701372012-01-30T20:50:24.798ZErinhttps://oozinggoo.ning.com/profile/erin9
<p>I've removed a few stuck caps with a wrench some rubber matting around the cap. Gently. Anything with rubber will allow you to get a better grip. </p>
<p>I've removed a few stuck caps with a wrench some rubber matting around the cap. Gently. Anything with rubber will allow you to get a better grip. </p> The best way I have found whi…tag:oozinggoo.ning.com,2012-01-30:1566398:Comment:3699452012-01-30T20:15:48.749ZTim Gillhttps://oozinggoo.ning.com/profile/TimGill
<p>The best way I have found which works really well is to pour boling water over it - this should melt the silicone and it will come off easley.</p>
<p>The best way I have found which works really well is to pour boling water over it - this should melt the silicone and it will come off easley.</p> I have a pair of yellow glove…tag:oozinggoo.ning.com,2012-01-30:1566398:Comment:3700332012-01-30T18:48:20.487ZSimon Lloydhttps://oozinggoo.ning.com/profile/SimonLloyd
<p>I have a pair of yellow gloves that have special grip.</p>
<p>They have never failed to get difficult lids off.</p>
<p>That & my trusted hair dryer</p>
<p>I have a pair of yellow gloves that have special grip.</p>
<p>They have never failed to get difficult lids off.</p>
<p>That & my trusted hair dryer</p> the black cap is under the al…tag:oozinggoo.ning.com,2012-01-30:1566398:Comment:3699352012-01-30T17:02:27.913ZGaryhttps://oozinggoo.ning.com/profile/Gary501
<p>the black cap is under the alloy top mine came off with a sharp pull and a bit of force wiggling it was fastened with some sort of solid glue no messy residue which has the screw cap moulded into it where the glue had set so when i push it back on it fits super and now i can take all off at the same time by twisting it off normally, i wouldnt heat up the copper bit as it may spoil it!</p>
<p>the black screw top has a rubber seal in it so once yopur done a good hand tight will suffice i…</p>
<p>the black cap is under the alloy top mine came off with a sharp pull and a bit of force wiggling it was fastened with some sort of solid glue no messy residue which has the screw cap moulded into it where the glue had set so when i push it back on it fits super and now i can take all off at the same time by twisting it off normally, i wouldnt heat up the copper bit as it may spoil it!</p>
<p>the black screw top has a rubber seal in it so once yopur done a good hand tight will suffice i should think</p> Thank you Gary,It is also an…tag:oozinggoo.ning.com,2012-01-30:1566398:Comment:3699162012-01-30T15:53:21.123Zpascalhttps://oozinggoo.ning.com/profile/pascalperret
<p>Thank you Gary,It is also an astro,the problem is that I can't see the black cap because it is so tightly stuck I can't get off the copper cap. I will try to heat it up</p>
<p>Thank you Gary,It is also an astro,the problem is that I can't see the black cap because it is so tightly stuck I can't get off the copper cap. I will try to heat it up</p> Hi if its the astro bottle th…tag:oozinggoo.ning.com,2012-01-30:1566398:Comment:3698612012-01-30T15:33:11.988ZGaryhttps://oozinggoo.ning.com/profile/Gary501
Hi if its the astro bottle the top is just glued onto the screw on lid i pulled this off mine then used a hairdyer on the black screw cap and gingerly used an ajustable pipe wrench and it went no problem, the threads should be the same way as normal<br />
Mine was a crestworth astro
Hi if its the astro bottle the top is just glued onto the screw on lid i pulled this off mine then used a hairdyer on the black screw cap and gingerly used an ajustable pipe wrench and it went no problem, the threads should be the same way as normal<br />
Mine was a crestworth astro Hi if its the astro bottle th…tag:oozinggoo.ning.com,2012-01-30:1566398:Comment:3701052012-01-30T15:30:54.783ZGaryhttps://oozinggoo.ning.com/profile/Gary501
Hi if its the astro bottle the top is just glued onto the screw on lid i pulled this off mine then used a hairdyer on the black screw cap and gingerly used an ajustable pipe wrench and it went no problem, the threads should be the same way as normal<br />
Mine was a crestworth astro
Hi if its the astro bottle the top is just glued onto the screw on lid i pulled this off mine then used a hairdyer on the black screw cap and gingerly used an ajustable pipe wrench and it went no problem, the threads should be the same way as normal<br />
Mine was a crestworth astro