Oozing Goo - The Lava Lamp Syndicate

My early 70s Century lamp takes about three hours to heat up and get flowing and then it is very sluggish.  I believe it is missing theheat ring that goes between the globe and the bulb.

Anybody have a spare heat ring?  Alternatively, anybody know how to make one?

Thanks.

Views: 549

Reply to This

Replies to This Discussion

First things first, what bulb do you have in there and what is your base calling for?  Thanks! MaGoo!

40watt A15 appliance bulb as originally called for.  

Jonas is selling a couple.

Thanks!

Alex said:

Jonas is selling a couple.

Hi , I am having what I think is the same issue, I have a new lamp am pretty sure it’s a century model , it takes like 2 hours to get going , sometimes the top of the glass isn’t even hot after 1 hour .

I did some digging on this web page and found this post , now I don’t even know what a heat ring looks like maybe someone can explain it , my lamp just has the base and globe and the screw cap . 

I have put a brand new a 15 bulb in and the same issue. Thanks for any advice . Here my lamp it’s on so I don’t want to lift the globe but I can later .

you guys are gonna love this idea!

TRake a standard 52oz cap and carve a hole out of the top.
Invert the cap and walla

Interesting idea , I only have this one lamp like this atm but that could work , am wondering wouldn’t it melt cause the cap is plastic ? You definitely know more then me so your advice is great thx . 

I was able to find an A 15 60 w bulb also and I have dimmer , I was thinking giving that a shot also . 

the weird things is the first few runs it worked great then the last few it just didn’t get hot . 

one last thing one is a heat ring look like I been trying goggle but no luck . 

thanks the advice 

NOT THE SCREW CAP!  The bottle-cap globes that have a metal cover over the bottle-cap.  That is what he means

bob y said:

Interesting idea , I only have this one lamp like this atm but that could work , am wondering wouldn’t it melt cause the cap is plastic ? You definitely know more then me so your advice is great thx . 

I was able to find an A 15 60 w bulb also and I have dimmer , I was thinking giving that a shot also . 

the weird things is the first few runs it worked great then the last few it just didn’t get hot . 

one last thing one is a heat ring look like I been trying goggle but no luck . 

thanks the advice 

Agree with Keith
I assumed too much
You use the SAME material as the original reflector ring
an aluminum cap from a 52oz modern globe and invert it after cutting the hole in the top



bob y said:

Interesting idea , I only have this one lamp like this atm but that could work , am wondering wouldn’t it melt cause the cap is plastic ? You definitely know more then me so your advice is great thx . 

I was able to find an A 15 60 w bulb also and I have dimmer , I was thinking giving that a shot also . 

the weird things is the first few runs it worked great then the last few it just didn’t get hot . 

one last thing one is a heat ring look like I been trying goggle but no luck . 

thanks the advice 

O wow , thanks and makes sense now , i have 2 of the modern ones here , how many inches wide would you say this thing should be ? , do you know where I could find a picture of this ? 

thanks for your advice 

i do not recall the hole size

install the bulb

measure and mark the height

drop in the upside-down cap

measure the difference

FYI, you only need a small amount of the lower neck of the blub to be exposed to the bottom for starlight illumination

http://oozinggoo.ning.com/photo/photo/search?q=heat+ring

original heat ring on the right side, home made tinfoil on the left side, not my photo

home made heat ring

bob y said:

O wow , thanks and makes sense now , i have 2 of the modern ones here , how many inches wide would you say this thing should be ? , do you know where I could find a picture of this ? 

thanks for your advice 

Reply to Discussion

RSS

About

Autumn created this Ning Network.

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service