Mathmos Jet - rewire - Oozing Goo - The Lava Lamp Syndicate2024-03-29T11:02:27Zhttps://oozinggoo.ning.com/forum/topics/mathmos-jet-rewire?commentId=1566398%3AComment%3A676441&feed=yes&xn_auth=noNot sure. It's been several y…tag:oozinggoo.ning.com,2018-05-26:1566398:Comment:6767942018-05-26T17:55:53.422ZErinhttps://oozinggoo.ning.com/profile/erin9
<p>Not sure. It's been several years since I did this. The only concern I see is that socket fitting through the hole in the base since it's all one piece. <br></br> <br></br> <cite>MichaelN77 said:</cite></p>
<blockquote cite="http://oozinggoo.ning.com/forum/topics/mathmos-jet-rewire?page=4&commentId=1566398%3AComment%3A676510&x=1#1566398Comment676510"><div><p>Would this work since the whole fixture comes out of the base?…</p>
</div>
</blockquote>
<p>Not sure. It's been several years since I did this. The only concern I see is that socket fitting through the hole in the base since it's all one piece. <br/> <br/> <cite>MichaelN77 said:</cite></p>
<blockquote cite="http://oozinggoo.ning.com/forum/topics/mathmos-jet-rewire?page=4&commentId=1566398%3AComment%3A676510&x=1#1566398Comment676510"><div><p>Would this work since the whole fixture comes out of the base?<a href="http://storage.ning.com/topology/rest/1.0/file/get/3127099577?profile=original" target="_self"><br/><img src="http://storage.ning.com/topology/rest/1.0/file/get/3127099577?profile=original" class="align-full" width="523"/></a></p>
<p><a rel="nofollow noopener" href="https://www.westelm.com/products/cord-sets-w769/" target="_blank"></a><a rel="nofollow noopener" href="https://www.westelm.com/products/cord-sets-w769/" target="_blank">West Elm Metallic Cord Set</a></p>
<p></p>
</div>
</blockquote> Would this work since the who…tag:oozinggoo.ning.com,2018-05-26:1566398:Comment:6765102018-05-26T05:30:28.742ZMichaelN77https://oozinggoo.ning.com/profile/MichaelNoriega
<p>Would this work since the whole fixture comes out of the base?<a href="http://storage.ning.com/topology/rest/1.0/file/get/3127099577?profile=original" target="_self"><br></br><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/3127099577?profile=original" width="523"></img></a></p>
<p><a href="https://www.westelm.com/products/cord-sets-w769/" rel="nofollow noopener" target="_blank"></a><a href="https://www.westelm.com/products/cord-sets-w769/" rel="nofollow noopener" target="_blank">West Elm Metallic Cord…</a></p>
<p>Would this work since the whole fixture comes out of the base?<a href="http://storage.ning.com/topology/rest/1.0/file/get/3127099577?profile=original" target="_self"><br/><img src="http://storage.ning.com/topology/rest/1.0/file/get/3127099577?profile=original" class="align-full" width="523"/></a></p>
<p><a rel="nofollow noopener" href="https://www.westelm.com/products/cord-sets-w769/" target="_blank"></a><a rel="nofollow noopener" href="https://www.westelm.com/products/cord-sets-w769/" target="_blank">West Elm Metallic Cord Set</a></p>
<p></p> Okay, so the parts are the sa…tag:oozinggoo.ning.com,2018-05-26:1566398:Comment:6765972018-05-26T03:57:51.394ZMichaelN77https://oozinggoo.ning.com/profile/MichaelNoriega
<p>Okay, so the parts are the same no matter what Mathmos lamp it is. That is good to know, Thank You.</p>
<p>Okay, so the parts are the same no matter what Mathmos lamp it is. That is good to know, Thank You.</p> This should help: http://oozi…tag:oozinggoo.ning.com,2018-05-26:1566398:Comment:6764412018-05-26T02:56:32.222ZErinhttps://oozinggoo.ning.com/profile/erin9
<p>This should help: <a href="http://oozinggoo.ning.com/forum/topics/how-i-finally-rewired-my" target="_blank">http://oozinggoo.ning.com/forum/topics/how-i-finally-rewired-my</a> <br></br> <br></br> <cite>MichaelN77 said:…</cite></p>
<blockquote cite="http://oozinggoo.ning.com/forum/topics/mathmos-jet-rewire?commentId=1566398%3AComment%3A676435&xg_source=msg_com_forum#1566398Comment676435"><div><p></p>
</div>
</blockquote>
<p>This should help: <a href="http://oozinggoo.ning.com/forum/topics/how-i-finally-rewired-my" target="_blank">http://oozinggoo.ning.com/forum/topics/how-i-finally-rewired-my</a> <br/> <br/> <cite>MichaelN77 said:</cite></p>
<blockquote cite="http://oozinggoo.ning.com/forum/topics/mathmos-jet-rewire?commentId=1566398%3AComment%3A676435&xg_source=msg_com_forum#1566398Comment676435"><div><p><a href="http://storage.ning.com/topology/rest/1.0/file/get/3127099666?profile=original" target="_self"><img src="http://storage.ning.com/topology/rest/1.0/file/get/3127099666?profile=original" class="align-full" width="200"/></a></p>
<p>I am going to rewire the green Fluidium I just aquirred. I was wondering if anyone knows what are the names of the highlighted pieces and what sizes I need please. Fluidium photos coming soon. I need to run out and get a UK adapter. </p>
</div>
</blockquote> I am going to rewire the gre…tag:oozinggoo.ning.com,2018-05-25:1566398:Comment:6764352018-05-25T22:02:18.840ZMichaelN77https://oozinggoo.ning.com/profile/MichaelNoriega
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/3127099666?profile=original" target="_self"><img src="http://storage.ning.com/topology/rest/1.0/file/get/3127099666?profile=original" width="200" class="align-full"/></a></p>
<p>I am going to rewire the green Fluidium I just aquirred. I was wondering if anyone knows what are the names of the highlighted pieces and what sizes I need please. Fluidium photos coming soon. I need to run out and get a UK adapter. </p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/3127099666?profile=original" target="_self"><img src="http://storage.ning.com/topology/rest/1.0/file/get/3127099666?profile=original" width="200" class="align-full"/></a></p>
<p>I am going to rewire the green Fluidium I just aquirred. I was wondering if anyone knows what are the names of the highlighted pieces and what sizes I need please. Fluidium photos coming soon. I need to run out and get a UK adapter. </p> Thanks for your advice Jim. T…tag:oozinggoo.ning.com,2010-12-09:1566398:Comment:1774432010-12-09T00:58:01.796ZErinhttps://oozinggoo.ning.com/profile/erin9
Thanks for your advice Jim. The part I'm missing are those lamp washers. I have the screw things (actually called nipples - weird, huh)?. So I'm close.<br />
<br />
As for those dimmers, do you wire those directly into the socket?
Thanks for your advice Jim. The part I'm missing are those lamp washers. I have the screw things (actually called nipples - weird, huh)?. So I'm close.<br />
<br />
As for those dimmers, do you wire those directly into the socket? Well, it looks like I've made…tag:oozinggoo.ning.com,2010-12-08:1566398:Comment:1774332010-12-08T22:54:34.705ZErinhttps://oozinggoo.ning.com/profile/erin9
Well, it looks like I've made some mistakes.<br />
<br />
I have demolished the original socket and the base, so that's out.<br />
<br />
I look forward to any help you can offer me with what I'm left with. Thanks Jim.<br />
<br />
<br></br>
<cite>LampHead said:</cite><blockquote cite="http://oozinggoo.ning.com/forum/topics/mathmos-jet-rewire?commentId=1566398%3AComment%3A177425&xg_source=msg_com_forum#1566398Comment177425"><div>OK you have a few options here for conversion but im going to go over the 2 most common and easiest…</div>
</blockquote>
Well, it looks like I've made some mistakes.<br />
<br />
I have demolished the original socket and the base, so that's out.<br />
<br />
I look forward to any help you can offer me with what I'm left with. Thanks Jim.<br />
<br />
<br/>
<cite>LampHead said:</cite><blockquote cite="http://oozinggoo.ning.com/forum/topics/mathmos-jet-rewire?commentId=1566398%3AComment%3A177425&xg_source=msg_com_forum#1566398Comment177425"><div>OK you have a few options here for conversion but im going to go over the 2 most common and easiest without using a dimmer..<br/> <br/>
# 1 - You can remove the UK cord from the socket and replace it with a US cord and use this bulb.. <a rel="nofollow" href="http://www.bulbman.com/index.php?main_page=product_bulb_info&products_id=7821" target="_blank">http://www.bulbman.com/index.php?main_page=product_bulb_info&pr...</a> The lamp would be ready to run at this point.<br/>
<br/>
# 2 - You can leave the entire lamp intact and use this plug converter.. <a rel="nofollow" href="http://www.radioshack.com/product/index.jsp?productId=3932601" target="_blank">http://www.radioshack.com/product/index.jsp?productId=3932601</a> and the above bulb.. <a rel="nofollow" href="http://www.bulbman.com/index.php?main_page=product_bulb_info&products_id=7821" target="_blank">http://www.bulbman.com/index.php?main_page=product_bulb_info&pr...</a> The lamp would be ready to run at this point.<br/>
<br/>
There is no simple way to convert these lamps if you do not use a dimmer, finding 30 watt US based bulbs that will fit is impossible. I have found the easiest way is to convert to US based socket, cord and 40 watt bulb and run it on a dimmer ( I run multiple converted lamps on the same dimmer, they each do not need a separate dimmer). 40 watts on the plastic Jets without a dimmer is asking for trouble, never use any type of glue or tape to hold electric parts together. You should be 100% safe when doing conversions and never cut corners. Do not break any parts on the lamps like you did with the tabs on the socket, a 12 cent washer would have done the same job without breaking the original socket. When I get the time I will try to post up a full list of conversions with pictures as there are several different ways to convert these lamps with different parts.</div>
</blockquote> OK you have a few options her…tag:oozinggoo.ning.com,2010-12-08:1566398:Comment:1774252010-12-08T21:29:22.516ZLampHeadhttps://oozinggoo.ning.com/profile/LampHead
OK you have a few options here for conversion but im going to go over the 2 most common and easiest without using a dimmer..<br />
<br />
# 1 - You can remove the UK cord from the socket and replace it with a US cord and use this bulb.. <a href="http://www.bulbman.com/index.php?main_page=product_bulb_info&products_id=7821" target="_blank">http://www.bulbman.com/index.php?main_page=product_bulb_info&products_id=7821</a> The lamp would be ready to run at this point.<br />
<br />
# 2 - You can leave the entire…
OK you have a few options here for conversion but im going to go over the 2 most common and easiest without using a dimmer..<br />
<br />
# 1 - You can remove the UK cord from the socket and replace it with a US cord and use this bulb.. <a href="http://www.bulbman.com/index.php?main_page=product_bulb_info&products_id=7821" target="_blank">http://www.bulbman.com/index.php?main_page=product_bulb_info&products_id=7821</a> The lamp would be ready to run at this point.<br />
<br />
# 2 - You can leave the entire lamp intact and use this plug converter.. <a href="http://www.radioshack.com/product/index.jsp?productId=3932601" target="_blank">http://www.radioshack.com/product/index.jsp?productId=3932601</a> and the above bulb.. <a href="http://www.bulbman.com/index.php?main_page=product_bulb_info&products_id=7821" target="_blank">http://www.bulbman.com/index.php?main_page=product_bulb_info&products_id=7821</a> The lamp would be ready to run at this point.<br />
<br />
There is no simple way to convert these lamps if you do not use a dimmer, finding 30 watt US based bulbs that will fit is impossible. I have found the easiest way is to convert to US based socket, cord and 40 watt bulb and run it on a dimmer ( I run multiple converted lamps on the same dimmer, they each do not need a separate dimmer). 40 watts on the plastic Jets without a dimmer is asking for trouble, never use any type of glue or tape to hold electric parts together. You should be 100% safe when doing conversions and never cut corners. Do not break any parts on the lamps like you did with the tabs on the socket, a 12 cent washer would have done the same job without breaking the original socket. When I get the time I will try to post up a full list of conversions with pictures as there are several different ways to convert these lamps with different parts. Jim said:Seeing as the elec…tag:oozinggoo.ning.com,2010-12-08:1566398:Comment:1774202010-12-08T20:53:22.904ZLampHeadhttps://oozinggoo.ning.com/profile/LampHead
<br/>
<br/>
<cite>Jim said:</cite><blockquote cite="http://oozinggoo.ning.com/forum/topics/mathmos-jet-rewire?page=5&commentId=1566398%3AComment%3A177370&x=1#1566398Comment177369"><div>Seeing as the electrical tape didn't hold, I would definitely recommend an upgrade to duct tape. That outta do it.</div>
</blockquote>
<br />
LOL the Red Green Show fix
<br/>
<br/>
<cite>Jim said:</cite><blockquote cite="http://oozinggoo.ning.com/forum/topics/mathmos-jet-rewire?page=5&commentId=1566398%3AComment%3A177370&x=1#1566398Comment177369"><div>Seeing as the electrical tape didn't hold, I would definitely recommend an upgrade to duct tape. That outta do it.</div>
</blockquote>
<br />
LOL the Red Green Show fix I am still working on it! It…tag:oozinggoo.ning.com,2010-12-08:1566398:Comment:1773702010-12-08T14:18:05.471ZErinhttps://oozinggoo.ning.com/profile/erin9
<p>I am still working on it! It has been turned off and disassembled! Any help would be appreciated.<br></br> <br></br> <br></br> <br></br> <cite>LampHead said:</cite></p>
<blockquote cite="http://oozinggoo.ning.com/forum/topics/mathmos-jet-rewire?commentId=1566398%3AComment%3A177350&xg_source=msg_com_forum#1566398Comment177350"><div><br></br> <br></br> <cite>Erin said:…</cite></div>
</blockquote>
<p>I am still working on it! It has been turned off and disassembled! Any help would be appreciated.<br/> <br/> <br/> <br/> <cite>LampHead said:</cite></p>
<blockquote cite="http://oozinggoo.ning.com/forum/topics/mathmos-jet-rewire?commentId=1566398%3AComment%3A177350&xg_source=msg_com_forum#1566398Comment177350"><div><br/> <br/> <cite>Erin said:</cite><blockquote cite="http://oozinggoo.ning.com/forum/topics/mathmos-jet-rewire?page=4&commentId=1566398%3AComment%3A177329&x=1#1566398Comment177328"><div>Ok, the tape and glue have melted. :( Looks like I need to find that piece, Autumn. Or try Epoxy.</div>
</blockquote>
<br/> I would not run the lamp anymore with that conversion, electricity is the last thing you want to mess with. You also could damage the base by melting it with that wattage bulb without a dimmer. Let me know if your still working on this lamp and I will post up a safe and proper fix tomorrow, there are several options available.</div>
</blockquote>