Missing Liquid - Oozing Goo - The Lava Lamp Syndicate2024-03-29T01:51:25Zhttps://oozinggoo.ning.com/forum/topics/missing-liquid?commentId=1566398%3AComment%3A585415&feed=yes&xn_auth=noThank you, very much for the…tag:oozinggoo.ning.com,2015-06-08:1566398:Comment:5856042015-06-08T20:04:01.003ZSteffenhttps://oozinggoo.ning.com/profile/Steffen
Thank you, very much for the Tipps. I try to fill up with distelled water. I hope that lamp run after that again.
Thank you, very much for the Tipps. I try to fill up with distelled water. I hope that lamp run after that again. Hi Steffan and welcome aboard…tag:oozinggoo.ning.com,2015-06-07:1566398:Comment:5852822015-06-07T20:25:30.442ZAladdin 2 Lavahttps://oozinggoo.ning.com/profile/Aladdin_Sane
<p>Hi Steffan and welcome aboard 'Star Ship OG.'</p>
<p>The level is not that bad, I would top up with just DI water, done this on lamps of my own when the level has been much lower than the lamp in your photo.</p>
<p>Good luck and keep us posted.</p>
<p></p>
<p>Hi Steffan and welcome aboard 'Star Ship OG.'</p>
<p>The level is not that bad, I would top up with just DI water, done this on lamps of my own when the level has been much lower than the lamp in your photo.</p>
<p>Good luck and keep us posted.</p>
<p></p> With screw-top lava lamps I h…tag:oozinggoo.ning.com,2015-06-07:1566398:Comment:5854152015-06-07T20:06:57.714ZScott Meekhttps://oozinggoo.ning.com/profile/ScottMeek
<p>With screw-top lava lamps I have topped up small liquid drops using distilled water then wrapped the glass threads with PTFE tape before capping.</p>
<p></p>
<p>With bottle cap globes I tighten the cap to the bottle with pliers before wrapping the cap where it meets the globe with self amalgamating rubber tape.</p>
<p></p>
<p>(I have found it best to place the cap back on the bottles/globes when the wax/liquid is hot)</p>
<p></p>
<p>Hope that helps.</p>
<p></p>
<p>With screw-top lava lamps I have topped up small liquid drops using distilled water then wrapped the glass threads with PTFE tape before capping.</p>
<p></p>
<p>With bottle cap globes I tighten the cap to the bottle with pliers before wrapping the cap where it meets the globe with self amalgamating rubber tape.</p>
<p></p>
<p>(I have found it best to place the cap back on the bottles/globes when the wax/liquid is hot)</p>
<p></p>
<p>Hope that helps.</p>
<p></p>