Oozing Goo - The Lava Lamp Syndicate

Filtering Pinky & Big Red June 2011

Views: 109

Comment

You need to be a member of Oozing Goo - The Lava Lamp Syndicate to add comments!

Join Oozing Goo - The Lava Lamp Syndicate

Comment by BlackGermanShepherd on January 29, 2012 at 1:40pm
Thanks, it did get alittle cloudy after the 1st filtering. What I did for the 2nd & have been doing since, is using the tube & funnel from a goo kit & pouring in on an angle. I'm going to have to try the ziplock, thanks for the tip.
Comment by matt01165 on January 29, 2012 at 11:03am

what your missing is avoiding pouring the fluiddirectly on the wax. get a plastic ziplock and place it down flat on top og the wax at the bottom. don't smash it down just let it set there so your fluid wont cloud up again 

Comment by BlackGermanShepherd on January 29, 2012 at 8:44am
MSR MiniWorks EX Microfilter is the one that I use. I got it at a Menards last spring.
Comment by Gary on January 29, 2012 at 6:49am

hi what filter are you using ?im looking for one but theyre too pricey for me at the moment im looking at one on ebay its ceramic one used for hiking camping etc and fits in a glasses case size

Comment by BlackGermanShepherd on December 24, 2011 at 1:54pm
I used the knife back then. Now I also use a smaller flat head screw driver. I'll use the knife just to get under it. Then get the flat head under it & work my way around. Looking at these pictures now it looks like I chewed it off. To avoid that now I use both them. When you get about half way around the caps just pop right off. Sometime you don't need the knife. Just 2 screw drivers. Okay, got to get back to this xmass party, football & beer.
Comment by Bill Smith on December 24, 2011 at 12:55pm

Hi,was wondering did you remove the bottle cap by just prising around the edge using one of the knives. 

Support Oozing Goo

By using the eBay button above, you support OG if you purchase anything. Thanks for thinking of us. Mark Goo

© 2020   Created by Mark Goo.   Powered by

Badges  |  Report an Issue  |  Terms of Service