Tags:
Views: 1871
That's true, variations exist withing the general formula. However, 80/20 is a good starting point since the hardware is pretty much a constant. In other words, if the hardware allows a 80/20 lamp to function properly (standard stuff, same light bulb, same wattage, same construction, same bottle, etc.) then it will also perform (with slight variations), such as 85/15 or maybe even 90/10. There will be adjustments required for the liquid however, to compensate for the reduced amount of wax and increased amount of water.
For instance, a 90/10 lamp is likely to run somewhat cooler than a 80/20 lamp. More water, water is a great heat exchanger, hence the lamp is likely to run a few degrees cooler, at operating temperature. A cooler lamp will affect the behavior of the wax within the lamp and it is this change in behavior that will need to be compensated for with adjustments in salinity and/or tweaks to the surfactant.
Gliter based lamps are likely to behave uniformly within the parameters of 80-90/20-10 range, with perhaps a slower flow in a cooler lamp than in a warmer one.
Arne said:
the ratio isnt constant. the early crestworth and also lava lite bottles had less wax , there is a comparison pic somewhere on this forum.
Telstar/Baby Astro (and now Evo as well) about 800ml. GooLamp sell some bottles (for their CandleFlow range) that will fit on a FireFlow (the Rocket style, not the rare 01 style) that come in at about 500ml - makes the rocker a bit more 'leggy' but easier to see in daylight.
1 |
Steve |
2 |
Howy |
3 |
Cameron Hill |
4 |
Modulo '70 |
5 |
The Lamp Caretaker |
6 |
Claude J |
7 |
Michael Smith |
8 |
trash cat |
62 members
18 members
19 members
21 members
48 members
9 members
21 members
7 members
39 members
124 members
© 2024 Created by Autumn. Powered by