Oozing Goo - The Lava Lamp Syndicate

My friend has a very long wall fish tank - 7.6ft long, 4 inches wide, 10 inches tall and is thinking about making it into a lamp. The base is wood so heating will have to be from the side at the base.

The issues I see with this idea is

- It may not withstand the temperature changes as it is not one piece of glass.

- The width of the tank is only 4 inches this may not be enough to get aducatue heat distribution for a good flow.

- As the heat source wont be directly under the wax it could be heated unevenly and the wax wont flow at all.

What is everyone's views of this - is it worth trying or the other option is to make it into a bubble lamp.

Views: 191

Reply to This

Replies to This Discussion

An actual fish tank with caulking in the corners and glass connections??

^^ I concur in addition to my post about the caulking/sealant on fish tanks.

Understandable Marcel it does seam that could be the case

I think there is plenty of sealant in the corners as it looks well built.

Reply to Discussion



Mark Goo created this Ning Network.

Support Oozing Goo

By using the eBay button above, you support OG if you purchase anything. Thanks for thinking of us. Mark Goo

© 2022   Created by Mark Goo.   Powered by

Badges  |  Report an Issue  |  Terms of Service