Oozing Goo - The Lava Lamp Syndicate

I’ve seen so picture charts with the different flows and if it’s to hot or cold  but the just right and the slightly too warm look the same to me in the pictures so I can never tell if/ when I should turn on my dimmers. What should I be looking for specifically and how much do I dim the lamps because sometimes I will turn the dimmer on and it stops flowing like it got to cold 

Views: 318

Reply to This

Replies to This Discussion

Hi , hope your doing well . For me I use the chart , then for. My lamp when it gets to hot or close to it I will lower it slightly . You sorta have to test each nite to what works best for you . U don’t want all the lava at the top or bottom both to hot and to cold will do this . So let the lamp get hot then lower the dimmer a little and see what happens.

once you do that say it flows good for another hour then leave the dimmer where it is . Hope this helps

Reply to Discussion

RSS

Latest Activity

andy ross posted a discussion
Saturday
Joey Williams posted a photo
Friday
Joey Williams posted photos
Jul 21
Joey Williams posted photos
Jul 21
Arne replied to Dee Pocha's discussion First Time Creating Lamp From Scratch. Wax/coil issues
Jul 20
Arne replied to IdOrU 02's discussion Shoutin' in the wind
Jul 20
Joey Williams updated their profile
Jul 19
Zodotheus is now a member of Oozing Goo - The Lava Lamp Syndicate
Jul 18

GooHeads

© 2026   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service