Filtered Grande in Window 03

Comment

Comment by Peter Panussi on September 29, 2017 at 2:42am

looks phantastic! I think I'm also gonna buy a filter, I always change the liquid, if it's cloudy, but that is always a bigger action, and I spent a lot of money for glykol, SLES, and distilled water, so a filter could be the better solution.

sometimes the lamp is clear after the change, but the flow boring - another argument for a filter :-)

Comment by T Sabo on September 24, 2017 at 3:51pm

Thanks for the tip...I'll post before and after pics of the nightmare Grande I got from Craigslist

Comment by Lenny on September 24, 2017 at 3:35pm

Looks like it, same case.

Comment by Lenny on September 24, 2017 at 3:34pm

I used a dowel to hold the wax in place so it wouldn't fall into the bottle and slowly poured it out. Just take your time.

Comment by T Sabo on September 24, 2017 at 3:33pm

It was this filter correct? Just to double check...lol

Comment by T Sabo on September 24, 2017 at 3:29pm

Great news... Thanks for getting back so quickly

Comment by Lenny on September 24, 2017 at 3:28pm

Yes, worked great and still flowing good. Just poured the fluid out into a container then filter it back in the lamp.

Comment by T Sabo on September 24, 2017 at 3:15pm

Did you use the Pure Easy Soldier Water Filter on that lamp? No issues with flow afterwards?

Please let me know. I would like to purchase that filter and not waste any money on it if there is an issue with it.