Oozing Goo - The Lava Lamp Syndicate

Hello I recently got an antique Mathmos lava lamp from a friend in the UK.

I brought it back with me and she told me that the last time it had worked was in June

She told me to change the lamp and it should be fine 

I got these lamps:

http://www.amazon.ca/Eveready-Clear-Light-Bulbs-Edison/dp/B006VEQ2BK

which have identical specs to the burnt out one 

and then I got this http://www.ebay.ca/itm/Goldsource-STU-300-W-Watt-Step-Up-Down-110V-...

as the transformer but the lamp wont turn on 

What could be the issue ? Is the whole thing just fried ?

Is the transformer not good enough?

The back of the plug says 250 V @ 2.5 Amps of the lava lamp the transformer is rated at 300 W 

I dont know much about electronics so please help

Views: 467

Reply to This

Replies to This Discussion

Canada 

Have you checked the fuse in the plug?. Often this blows when the bulb fails.

Reply to Discussion

RSS

About

Mark Goo created this Ning Network.

Support Oozing Goo

By using the eBay button above, you support OG if you purchase anything. Thanks for thinking of us. Mark Goo

© 2023   Created by Mark Goo.   Powered by

Badges  |  Report an Issue  |  Terms of Service