Problems & Questions (2,523)
| Featured Discussions |
|---|
I Can Take No More - Colossus Goo Kit Project (Sorta')I've tried different coils, removing the small coil, putting in new custom coils, slowly warming the wax for weeks - still my Purple/Pink h… Started by KirkLatest Reply |
The Gookit TutorialI've decided to remove the info from here and just update it from the lava library. Any other additions or suggestions that should be added… Started by Dr. WHAT?!Latest Reply |
How I finally re-wired my Mathmos Jet/AstrobabyI got this lamp off eBay last year and felt my best bet for future enjoyment was to re-wire for the US. I made one really bad attempt (seen… Started by ErinLatest Reply |
| Discussions | Replies | Latest Activity |
|---|---|---|
Bubble EliminationSo I’ve been on a quest to figure out why master fluid bubbles form in wax. It’s been a long road but thanks to some other posts here on OG… Started by Jsmooth |
7 |
May 3 Reply by Greg Lockhart |
First Time Creating Lamp From Scratch. Wax/coil issuesHey guys and gals, I’ve set out to make my own lava lamp from scratch. I believe I have all the right stuff, but it’s bizarre: the wax doe… Started by Dee Pocha |
0 | Apr 24 |
Removing Vintage Caps from 52oz. GlobesI am posting this information in the hope that we will all benefit from it. Shortly after joining this site I was reading about the diffic… Started by LavaMeister |
2 |
Apr 18 Reply by Mark |
Lava separation: A less invasive potential fixHi fellow lava lamp lovers, It’s been a while since I’ve been on here, but I thought I might share an experience I had repairing a lamp tha… Started by Adam |
15 |
Apr 7 Reply by Rottnlove |
The best way to thoroughly clean the inside of globes?Topic says it all. I've tried everything but it's a pain. Even bottle brushes just don't really get the job done because of the angle requi… Started by KittenChops |
8 |
Mar 14 Reply by Rottnlove |
How to fix wax sticking to your globeAfter many months of frustration I have finally figured out the cure for wax sticking to the glass. I am confident that this will work for… Started by Autumn |
27 |
Mar 14 Reply by Rottnlove |
1990 Lava FluidHello Oozing Goo! I bought this 1990 Midnight screw top a few days ago. Unfortunately, when I brought it home, I noticed it was leaking f… Started by GrooEv |
3 |
Nov 10, 2025 Reply by Claude J |
Mathmos Lunar RocketHello Gooers, Does anyone own a Mathmos lunar with the bullet top still intact? If so could I have the length and diameter please? Started by Gavin |
4 |
Sep 2, 2025 Reply by Gavin |
Mathmos Lunar Rocket tipsHello Fellow gooers, I have a lovely Mathmos Lunar that I have slowly been refurbishing. Wiring and dimmer switch have been replaced and r… Started by Gavin |
5 |
Sep 2, 2025 Reply by Gavin |
LLC Wax issue (advice needed badly)Hey all, I already made this issue known on the discord, but wanted to post it in the forums as well in case others see it and could give m… Started by KittenChops |
0 | Jul 12, 2025 |
Latest Activity
© 2026 Created by Autumn.
Powered by
