Need help replacing wizard glitter lamp cap
I have a wizard lamp that needs the plastic stop replaced but I don't know how to take off the cap with damaging it. Also the plastic stop has cracks in it. Is there a place online that I can purchase the cap and plastic stopper? Also what will I need to pull the existing cap and stopper off and put the new stopper and cap on? I would appreciate all suggestions and help on this matter.
P.S The stopper is red but when I tried to get a closeup of lamp it looks white. Lol
P.S The stopper is red but when I tried to get a closeup of lamp it looks white. Lol
- Attachments:
-
-
image.jpeg, 281 KB
-
Replies to This Discussion
-
Permalink Reply by Sentrex on
-
See the link below regarding half of your question.
Hopefully someone else can answer your question regarding the stopper.
Good Luck!
-
-
You could always use a cork or rubber "cork". They sell them at most ACE Hardware stores in a variety of sizes.
-
-
Just came across these rubber stoppers that might do the trick:
https://www.sciplus.com/p/LG-BLUE-STOPPER_33795
Maybe the orange ones would work.
About
Support Oozing Goo
By using the eBay button above, you support OG if you purchase anything. Thanks for thinking of us. Mark Goo
© 2019 Created by Mark Goo.
Powered by
