Oozing Goo - The Lava Lamp Syndicate

Helpful Hint.
if you lose the spring from the globe when restoring it, you can always use stainless steel wire mesh screen. The bigger the mesh size, the better
You can use a stainless steel sink strainer with the chrome edge removed
Or stainless steel spring disc

Views: 46

Reply to This

Replies to This Discussion

Very interesting. Anything to give an anchor to the goo!

not so much an anchor but to transfer the heat generated by the bulb, without it the goo will just sit there in a gelatinous mass

Jsmooth said:

Very interesting. Anything to give an anchor to the goo!

Reply to Discussion

RSS

About

Mark Goo created this Ning Network.

Support Oozing Goo

By using the eBay button above, you support OG if you purchase anything. Thanks for thinking of us. Mark Goo

© 2022   Created by Mark Goo.   Powered by

Badges  |  Report an Issue  |  Terms of Service