Oozing Goo - The Lava Lamp Syndicate

I have been using a screw clamp to seal the caps back on some globes I have been working on but am considering the purchase of a capper from Amazon.

Bottle Capper Set with 55 Caps Included by Perrysbrewer

Does anyone have experience with a tool like this and if yes, any recommendations or warnings?

Later I will post summary of a purple wax / clear liquid globe that I tuned up in an effort to contribute to all of the great information that I have been reading here. Really appreciate all of the past discussions - lots of great material!!  Without this site there is no way that I could have started working on these lamps with any sense of true understanding so thanks again to all you long timers.

Views: 541

Reply to This

Replies to This Discussion

They don't work because the neck doesn't have a secondary lobe for the capper to pull onto. Stick with the hose clamp.

I bought one of those and they do not work for lava lamps

Only  for long neck bottles

Buy  the vertical table mounted one form a micro brewery supplier or ebay

Get one like this

Same as I have'

http://www.ebay.com/itm/Super-Agata-Italian-Bench-Capper-Homebrew-B...

they are not too expensive =especially if you watch the auctions

Noting else works ell enough

Hose clamps just don't do the job as well=-especially if you ever recap a glitter

This is exactly what your looking for:

http://i2.cdscdn.com/pdt2/1/0/1/1/700x700/auc2009887068101/rw/hambleton-bard-outil-a-capsule-100-bouchons-de-b.jpg

check for the bottle cap that comes with a rubber seal inside, makes it clean and final.

Can reccap every size up to 52 0z globe.

I use a hammer capper with a rubber mallet . I've capped a shit ton of globes never had a issue and its small enough to fit in a drawer rather take up counter space.

http://www.ebay.co.uk/itm/Youngs-Hammer-Capper-for-beer-bottles-wit...


thats pretty cool!


Dr. WHAT?! said:

I use a hammer capper with a rubber mallet . I've capped a shit ton of globes never had a issue and its small enough to fit in a drawer rather take up counter space.

http://www.ebay.co.uk/itm/Youngs-Hammer-Capper-for-beer-bottles-wit...

Definitely very useful! I've had mine for 10+ years still works like a charm.

Are you guys putting the original caps back on or using new caps every time?

Curious because we all know how important the cap can be

Worked 12 hours yesterday and did not get a chance to order a capper but wanted to say thanks again for all of the feedback!!!

I use new caps. I never had luck getting a good seal using the old bottle caps.

I use the hand capper and put on new caps I don't see the point in reusing the old caps that has the potential to cause issues

Thanks again for all of the input - ended up ordering the press and some rubber sealed caps.

Hopefully I can have some sharp lamps to share here soon!

Thanks again all - I ended up going with the capper that Flip recommended. I could only find the mallet capper from the UK and for $20 the model below works really nice. Well worth the money IMO.

flip said:

This is exactly what your looking for:

http://i2.cdscdn.com/pdt2/1/0/1/1/700x700/auc2009887068101/rw/hambleton-bard-outil-a-capsule-100-bouchons-de-b.jpg

check for the bottle cap that comes with a rubber seal inside, makes it clean and final.

Can reccap every size up to 52 0z globe.

Reply to Discussion

RSS

About

Autumn created this Ning Network.

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service