Oozing Goo - The Lava Lamp Syndicate

what should i use to add color to a grande liquid?

Views: 605

Reply to This

Replies to This Discussion

also, do i add it when it's cold
food dye works ok
this is for a lava louie rebuild i bought from ebay many months ago but i want to add color to it. it's currently clear
interesting idea. i was hoping JM would chime in. i know he's not a fan of doing this

so do i do it when the lamp is cold or running?
Hey Everyone,
We do not recommend coloring the water. It is very hard to find companies that make 100% water based dye. If you do find a fully water based dye you also run into the chance that the may have used regular water with their dye. All the impurities that are in "tap" water is what clouds up lamps.

I am not saying it is impossible. It is just risky. In my opinion there is nothing is quite like a crystal clear lamp. It is the "magma" that is so mesmerizing. Not the murky water.

Marcel has some good suggestions on changing the water color. Diluting it with more distilled water is definitely the way to go.

Hope you all had a great New Year!

Jonny


Again, Neither Magma Tower or I recommend you change the water color.
In two original Mathmos Astros, one (supposedly still original) 1990ies Crestworth and also in Lamps I restored myself, I have, successfully, used the ink you get for the DIY-Refilling of inkjet printer cartridges to color the 'water'.
It takes only a few drops for a good saturation and you can mix your desired color following basic rules applying to mixing Cyan, Magenta and Yellow. The coloring also turns out to be stable and fades much much slower.

Of course it is always an experiment at your own risk and, by all means, you should always test it in a bottle of water first, as to find out how many drops of ink you need for the saturation you want, because it is easy to overdo the coloring!
You can always add yet another drop, but you can not take out one too many!
did annybody try useing alcohol based ink as liquid colouring?

just curious
in late August, I used a small screwdriver to puncture the cap, a McCormicks neon food dye in a syringe & added the colors one at a time. I thought it turned out interesting & my color hasn't faded... till the summer sun comes this year ;D

i wonder what mathmos uses. i wonder if they would tell me
I tried this with an old clear/green Mathmos astrobaby. The dye was Mc Cormick Neon food color & egg dye, I use the yellow color with a tiny bit of green.
The result didn't turn out as well as I expected: it brought definitely some shimmering to the lava but at the expense of its density & consistency, with some bubbles.

Reply to Discussion

RSS

About

Mark Goo created this Ning Network.

Support Oozing Goo

By using the eBay button above, you support OG if you purchase anything. Thanks for thinking of us. Mark Goo

© 2022   Created by Mark Goo.   Powered by

Badges  |  Report an Issue  |  Terms of Service