Oozing Goo - The Lava Lamp Syndicate

I recently purchased a new Mathmos lamp through a eBay reseller who said he acquired it from the Mathmos factory in the UK. He shipped it to me in the United States. It came in what looked like entirely authentic factory packaging. The model is 'Mathmos Heritage Astro Lava Lamp Copper Finish with Red Wax in Purple Liquid'.

Twice I've had it plugged in for over 8 hours and the lava never moves from the bottom of the lamp. The bulb is working and appears to be heating.

I made sure the room was at a good temperature (>20 C). The coil appears to be well-positioned on the very bottom of the bottle.

Note that I'm using an adapter so that I can plug it into an American electrical outlet.

Note also that I live near Chicago and that the unit was shipped in below freezing temperatures. I did not attempt to turn it on for 24 hours after I took it in off my step. I'd read somewhere in one of these forums on this site before I purchased that prolonged exposure to cold even before first use can permanently damage the wax. My eBay seller said he had never heard of that problem so I asked him to go ahead and ship to me.

I'm hoping that my brand new unit is not defective. Can anyone suggest some things I can try to get the lava flowing before I pursue getting it replaced as a defective unit.

Views: 304

Reply to This

Replies to This Discussion

First thought, you say you are using a plug adapter.  Is it an adapter or converter?  UK uses 220 volt outlets, US uses 110v outlets.  If you are using an adapter the lamp isn't getting enough current to heat properly.  A proper converter will change the US outlet from 110v to 220v thus allowing the right current to the lamp.

Thank you Keith! 

I'm not sure I get the difference between an adapter and a converter. The device I'm using is one of those inexpensive little blocks into which you insert one type of plug and it allows you to insert into whatever type of outlet you've got. It's the travel variety. I've used them with no issues while traveling. Do you mean a more elaborate device? Isn't the sort of adapter I'm using already stepping the current? 

This is a converter, I don't know what you have but just an adapter won't change the current

https://www.amazon.com/gp/product/B00BQ0FQ4S/ref=as_li_ss_tl?ie=UTF...

Thank you! I get the idea. If that's all I need, that's an easy fix. 

alternatively just put a US bulb in it-easy.

All: 

I got my hands on a step transformer to convert 120v to 220v, plugged it in and my new Mathmos lamp works like a charm. Thank you everyone for your suggestions and advice. I'll know where to go in the future. 

Jim 

Glad it worked out for you!  Share a picture with us now ;)

Jim said:

All: 

I got my hands on a step transformer to convert 120v to 220v, plugged it in and my new Mathmos lamp works like a charm. Thank you everyone for your suggestions and advice. I'll know where to go in the future. 

Jim 

Reply to Discussion

RSS

About

Autumn created this Ning Network.

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service