first , ty for accepting me into your community.
ive been browsing the forums for a couple weeks now trying to find a solution.; the wax in my century just melts and sits motionless.
ive tried reducing the wattage of the bulb. i havent tried a dimmer yet, but even when the lamp is turned off and begins to cool nothing happens. the wax does melt really quick, and if you slowly tilt the glass, you can see movement, but nothing rises or bubbles up. ive added an epsom salt mixtuire, but that did not improve anything.
Tags:
Views: 717
Provided you have eliminated all other troubleshooting options:
I.e. a fresh 40 watt light bulb, no air movement from ceiling fans, heat registers, floor heaters, fans, etc., it is not overheated, it lost its specific gravity/Density (float-ability) due to age
you added Espoon salt so that ruined the master fluid
Propylene glycol is the only acceptable chemical to adjust the density
Salt is corrosive and will destroy the coil, Its ability to adjust the density is unstable and will cloud the water
its should be reserved for high school science projects.
I'd start over with a 60 Propylene Glycol/ 40 Distilled Water mixture with @1tsp of SLES added to break the surface tension and stop sticking
Then,..adjust accordingly.
It still sinks add more PG
If it floats (without bubbles in the wax) then add more distilled water to make it heavier
Ty for the info. The room temp is good, basement room away fro windows or vents and a couple new bulbs were tried. I thought I had read numerous places of using a salt mixture. I’ll get the right stuff and do a fluid change
Hi Dave, Do you have an update on how the PG worked out?
i did a fluid change as Claude J suggested. i was getting no movement at all, so i increased the glycol amount slightly, and here is where im at. I have not added SLS, i need to order some. the movement in the video is not constant,. sometimes it will be minutes before a large blob releases.
just got my bottle of sls in the mail, and was suprised at how thick it is. almost like paste. is that normal?
when rinsing/coating a globe to prevent sticking, do you use 100%sls or dilute it?
NO, do not use as is
dilute it until it flows easily
@20% distilled water
Hi, so no salt or perk? Does Gulf wax and some LP at a 1:6 ratio sound good for the ooze?
Claude J said:
Provided you have eliminated all other troubleshooting options:
I.e. a fresh 40 watt light bulb, no air movement from ceiling fans, heat registers, floor heaters, fans, etc., it is not overheated, it lost its specific gravity/Density (float-ability) due to age
you added Espoon salt so that ruined the master fluid
Propylene glycol is the only acceptable chemical to adjust the density
Salt is corrosive and will destroy the coil, Its ability to adjust the density is unstable and will cloud the water
its should be reserved for high school science projects.I'd start over with a 60 Propylene Glycol/ 40 Distilled Water mixture with @1tsp of SLES added to break the surface tension and stop sticking
Then,..adjust accordingly.
It still sinks add more PGIf it floats (without bubbles in the wax) then add more distilled water to make it heavier
you have to have an understanding of what the components of wax and master fluid do, before blindly mixing them. t
There is a wealth of info on here if you look hard enough, that will guide you through the process
Johnny said:
Hi, so no salt or perk? Does Gulf wax and some LP at a 1:6 ratio sound good for the ooze?
Claude J said:Provided you have eliminated all other troubleshooting options:
I.e. a fresh 40 watt light bulb, no air movement from ceiling fans, heat registers, floor heaters, fans, etc., it is not overheated, it lost its specific gravity/Density (float-ability) due to age
you added Espoon salt so that ruined the master fluid
Propylene glycol is the only acceptable chemical to adjust the density
Salt is corrosive and will destroy the coil, Its ability to adjust the density is unstable and will cloud the water
its should be reserved for high school science projects.I'd start over with a 60 Propylene Glycol/ 40 Distilled Water mixture with @1tsp of SLES added to break the surface tension and stop sticking
Then,..adjust accordingly.
It still sinks add more PGIf it floats (without bubbles in the wax) then add more distilled water to make it heavier
i notices wax started sticking, so i took the steps to coat it with sls too prevent sticking, refilled with the master fluid and now im back to the wax melting but not rising. could that amount of sls left on the bottle have caused that?
Claude J said:
NO, do not use as is
dilute it until it flows easily
@20% distilled water
1 |
The Lamp Caretaker |
2 |
Arne |
3 |
LampHead |
4 |
Jump Energy MAN |
5 |
Twinkiebabie |
6 |
Todd |
7 |
Steve |
8 |
Cameron Hill |
62 members
18 members
19 members
21 members
48 members
9 members
21 members
7 members
39 members
124 members
© 2024 Created by Autumn. Powered by