I bought a clear view lamp off marketplace for $5. The master fluid was extremely cloudy and the goo was chunky and would not flow. I heated the lamp and poured out the goo with the master fluid. I'm left with an empty globe with goo stuck all on the sides. What would be an efficient way to clean this out? I know the globes and light bulbs for these in particular are different than your standard lamp. I normally only collect the pre 2003 lamps, but this one isn't one I see I the wild ever. For $5 I took a gamble.
Any advise would be super helpful!
Picture attached
Tags:
Views: 152
Hi Courtney. Claude Johnson of LavaLab Creations mapped it all out for you (scroll down to cleaning a globe). It's easy...just take your time. Good luck.
https://lavalabcreations.com/pages/lava-lamp-replacement-wax-instru...
Thank you Denny!
Hello Courtney
We also sell a specific chemical for cleaning difficult globes
works much better than Dwn and doesn't suds up as much
https://lavalabcreations.com/products/globe-cleaner
denny mcnerney said:
Hi Courtney. Claude Johnson of LavaLab Creations mapped it all out for you (scroll down to cleaning a globe). It's easy...just take your time. Good luck.
https://lavalabcreations.com/pages/lava-lamp-replacement-wax-instru...
1 |
The Lamp Caretaker |
2 |
Arne |
3 |
Jump Energy MAN |
4 |
Twinkiebabie |
5 |
Todd |
6 |
Steve |
7 |
Cameron Hill |
8 |
Anthony Dang |
62 members
18 members
19 members
21 members
48 members
9 members
21 members
7 members
39 members
124 members
© 2024 Created by Autumn. Powered by