Oozing Goo - The Lava Lamp Syndicate

OK, so I purchased a capper from eBay with 40 free caps. As some of you know I have been having fairly good success adding a little drop of pears hand soap through a pin hole on china lamps caps, giving them a better flow. Now I want to re-cap them properly.

So I am basically asking if there is anything I should know, any warnings about using a capper. I have never used one before it looks fairly simple, but I think I better be sure before I start ripping my lamps open.

The one I bought...

Views: 62

Reply to This

Replies to This Discussion

This wont cap lamps properly. It requires a ring to grab onto that lava lamps do not have. When you get it use it on a beer type bottle and you will see the difference. However I have found the actual crimping part which unscrews is good at putting the cap on and then I use a hose clamp to tighten the cap for a perfect crimp.
Damn, I thought it was gonna be too easy!

Reply to Discussion

RSS

About

Mark Goo created this Ning Network.

Support Oozing Goo

By using the eBay button above, you support OG if you purchase anything. Thanks for thinking of us. Mark Goo

© 2022   Created by Mark Goo.   Powered by

Badges  |  Report an Issue  |  Terms of Service