Oozing Goo - The Lava Lamp Syndicate

I've made my first attempt @ making fluid. And well, it's coming along. I've got a dome column/dome that's about halfway up the 52oz but won't flow. I've been gradually adding natural salt, non iodized with no additives, and melting it in distilled water. Then adding while warm, and watching it. I must have added a total of about 4 teaspoons now and it's getting better but not quite breaking into bubbles. Still like I said that dome like column that does nothing. I've added approximately 3 drops of concentrated dish washing liquid to the solution lightly diluted in water. Any pointers?

Views: 128

Reply to This

Replies to This Discussion

Here are 2 pix of the lamps I'm working on. The red one is the one I'm referring to above. The orange is one I've posted about before and have had trouble with. I tried to readjust the flow by putting an extra coil in it and it worked now, it's back to the good ol half column goose egg thing. And it stays like that after 2 hours of running. So here's the pix. Please get back to me on this post.
Attachments:
Are you using epson salts?
That's the secret.
http://www.moltenmeditation.com/lava.htm
Look at this link. I have replaced the water in 4 lamps and I used this method and it has worked every time.
Bert
6-ft-under.com

Reply to Discussion

RSS

Latest Activity

Coolsox and Paulb are now friends
12 hours ago
Anil Celik is now a member of Oozing Goo - The Lava Lamp Syndicate
Wednesday
IdOrU 02 posted discussions
Monday
Julie is now a member of Oozing Goo - The Lava Lamp Syndicate
Oct 17
Elowen updated their profile
Oct 17
Elowen is now a member of Oozing Goo - The Lava Lamp Syndicate
Oct 16
johnyosin updated their profile
Oct 15
Gijzzz posted photos
Oct 14

GooHeads

© 2025   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service