Wax won't stick to coil? Solution here!

[teltras]

Wax won't stick to coil?

This is how I did it

1 - Drain original liquid and save it for later. (Use a clean container for it)

2 - After liquid is removed heat the wax on the Lava Lamp base.

3 - After wax melt remove the coil with a hook

4 - Clean the coil with hot water and dish soap, gently

5 - Dry the coil and use break-cleaner  to degrease it completely.

6 - With wax melted put the coil inside.

7 - Let the wax cool down! This is important.

8 - Put the original liquid on the Lava Lamp and close it.

9 - Turn it on!

Done!

Your Lava Lamp should be great after this steps

[Sentrex]

I have a pile of coils with this problem.... never thought about the braklean so will try the next time I have this issue. Thanks for sharing