"Here's the lamp now. After running 6-8 hours a few times, the fluid has gotten even clearer."
norush's Page
Latest Activity
"The liquid was cloudy beyond repair. I was forced to dump the liquid and start fresh. I marked the level of cold liquid and carefully dumped it. Used tap water to get the level to about 3/4 full. Then mixed 1 cup water with 1/2 cup canning salt.…"
"I picked up a clear/red 1973 Century lamp with very serious wax separation issues. The procedure described above worked pretty well. Now I need to deal with the cloudiness of the liquid."
"Just note, that adapter cannot have reversible polarity on the tip. It will only adapt to a positive tip device. If you plug it into a negative tip device it will provide a bad time. The reversible adapters exist but tend to be a little more…"
"This is the adapter I used in the photos and when I was running it. Excellent little adapter to kick around. https://www.amazon.com/ZOZO-Regulated-Switching-Replacement-Electronics/dp/B015PXUHYA"
"Haha, that works! Once I can remember what I donated that cord to I can get the info of that plugs maker to you. I know I bought it on Amazon, let me check my purchase history."
"LOL! I'm using a power adapter from a Christmas tree top angel on mine now."
"The more I think of it too, I had been using an universal adapter to power it a while back. That adapter has since been integrated into some other random item that needs power right now, haha!"
"So the power block I had kept with the lamp is apparently the wrong one. Thankfully my device had the plug spec on the casing. It is a 12v output, 1 amp positive pole. Here is a picture of the back of my disc. It is the large Luminglass, green, made…"
"I have the Lumisource plasma light but didn't have the power cord with light switch."
"Excellent! I will get you the image ASAP tonight. You are looking for the Luminglass large plasma disc, correct?"
Profile Information
- Something Interesting About Me:
- I like spiders and snakes
- Where I Live:
- WIsc
- My First Lava Lamp was:
- Silver Wizard Purple Glitter 6633
- My Collection Includes this many Lava Lamps:
- 12
- My Favorite Lava Lamp is:
- #13 Clear/Blue
norush's Photos
Comment Wall (9 comments)
- At 3:52am on March 18, 2020,
Maris Ahmed said…
Good Day,
How is everything with you, I picked interest on you after going through your short profile and deemed it necessary to write you immediately. I have something very vital to disclose to you, but I found it difficult to express myself here, since it's a public site.Could you please get back to me on:( mrsstellakhalil5888@gmail.com ) for the full details.
Have a nice day
Thanks God bless
Stella.
- At 9:10pm on February 10, 2020,
VOXul said…
Just note, that adapter cannot have reversible polarity on the tip. It will only adapt to a positive tip device. If you plug it into a negative tip device it will provide a bad time. The reversible adapters exist but tend to be a little more expensive.
- At 9:04pm on February 10, 2020,
This is the adapter I used in the photos and when I was running it. Excellent little adapter to kick around. https://www.amazon.com/ZOZO-Regulated-Switching-Replacement-Electronics/dp/B015PXUHYA
- At 9:00pm on February 10, 2020,
Haha, that works! Once I can remember what I donated that cord to I can get the info of that plugs maker to you. I know I bought it on Amazon, let me check my purchase history.
- At 8:50pm on February 10, 2020,
The more I think of it too, I had been using an universal adapter to power it a while back. That adapter has since been integrated into some other random item that needs power right now, haha!
- At 8:46pm on February 10, 2020,
So the power block I had kept with the lamp is apparently the wrong one. Thankfully my device had the plug spec on the casing. It is a 12v output, 1 amp positive pole. Here is a picture of the back of my disc. It is the large Luminglass, green, made by Can You Imagine. Hopefully this helps you out!
- At 3:55pm on February 10, 2020,
Excellent! I will get you the image ASAP tonight. You are looking for the Luminglass large plasma disc, correct?
- At 3:51pm on February 10, 2020,
Hi Russ! My apologies, I had completely forgotten about the notification from you about the Lumisource Plasma Glass power supply info! I will dig it up tonight and get you a photo of the power block if you are still in need of this info!
- At 1:36pm on January 14, 2020,
Claude J said…
Welcome to OG!
I love Wizards too and customize them
About
Top Members
| 1 |
Hermit |
| 2 |
The Lamp Caretaker |
| 3 |
Arne |
| 4 |
LampHead |
| 5 |
Tori |
| 6 |
Jump Energy MAN |
| 7 |
Twinkiebabie |
Groups
-
Fantasia Products
62 members
-
Starship Fleet Command
18 members
-
The Soap Lake lava lamp …
19 members
-
We love French Boilers
21 members
-
Lava Lamp Scientists
48 members
-
Midnight Group
9 members
-
Florence Art Lamps
21 members
-
OG Mod Team
7 members
-
eBayniacs
39 members
-
Goo Kit Conversions
124 members
© 2024 Created by Autumn.
Powered by
