Ok - Six Feet Under (Bert) was nice enough to send me a filter pump to use. I got it in and started pumping. I have a few questions..
1 - How many times do I need to filter a grande to see results? I can't tell if it's doing much but I have filtered it at least 1 times, if not 1 1/2 times already.
2 - How hard should I have to pump? It seems pretty easy to pump this thing. I just want to make sure all is good.
Lastly, what I am doing is pumping a pitcher full, 3/4 of the lamp and then dumping it back in. I have done this twice already. I will keep going if it takes multiple times, but I am just needing confirmation.
Also, the ceramic core inside is cracked. Will that effect performance? I left a vm for Bert to find out if that happened before or during transit and whether it was ok. I will feel bad if it happened in transit. :(
I just bought one of these MSR miniworks filters to give a few globes a try. I have a blue/white grande that i got from ebay a few years ago that I have never used as it turned up soooooo cloudy.
Pump should be here tomorrow.
Any tips for you guys that have used it would be most appreciated.
Thanks, wish me luck!
Permalink Reply by Kris on August 25, 2009 at 10:51am
It's a simple filter. You can use it right out of the box. When I did the grande, I filtered it from the lamp into some jugs. That was one filter. Instead of pouring back in or anything else, I filtered it from the jugs, back into the lamp. So all the fluid was filtered twice. Out and then in. Was really easy. Just takes a little time. About 20 minutes or so for a full lamp. Maybe 30.
Permalink Reply by Kris on August 27, 2009 at 12:43pm
No. It might be ok for some lamps that are not nearly as cloudy but just a tad. However it will eat up filters and be costly. The results are not nearly as good either.
Permalink Reply by Kris on August 27, 2009 at 12:58pm
The PUR filtering method for me - ate up 1 filter on 1 go around. That was on the blue/white grande I did. I went through 4 filters. The filter lasted for 1 pass and that was it. After that it was super slow to filter and did nothing to improve the fluid. At $10 a pop, it's a waste. Rinsing the filters will result in a non working lamp as water will be introduced to the fluid and it will destroy the flow.
Filter pumping with the MSR is 100x's better and gives a perfect result every time. Cleaning and how long it lasts is listed in the instructions. Easy to clean and lasts a very long time.
Thank you, yeah I will have to go with the pur method for now, I just started collecting lava lamps (hardcore) and only have a couple that are cloudy. Im sure the msr is great but untill I have a bunch of cloudy lamps it dosen't seem worth the price.