Oozing Goo - The Lava Lamp Syndicate

I have 3 Grande Lava lamps.

I replaced the bulbs with 130 volt R20 bulbs but found that the lava was not as lively as before. I did some research and found that the 130v has a thicker filament and burns cooler than 120v.

I am ordering some 120v and will verify my hypothesis.

Views: 190

Reply to This

Replies to This Discussion

Reporting that one should always use a 120v bulb in the Grande Lava. The flow improved and lamp is back to normal after using 130v for way too long.

While you will probably extend bulb life running a 130v/100w for a grande, the wattage drops a decent amount when running it at 120v for sure. Somewhere buried in threads here there were some calculations being made on wattage drop when running 130v bulbs in 120v appliances.

Reply to Discussion

RSS

Latest Activity

Arne posted photos
14 hours ago
Kelly Geer is now a member of Oozing Goo - The Lava Lamp Syndicate
yesterday
Jason replied to The Lamp Caretaker's discussion Icon Series Lava Lamps For Sale
Saturday
Jason replied to The Lamp Caretaker's discussion Icon Series Lava Lamps For Sale
Saturday
IdOrU 02 and Christian are now friends
Friday
IdOrU 02 replied to IdOrU 02's discussion Color disc replacement
Thursday
Christian replied to IdOrU 02's discussion Color disc replacement
Thursday
Jason is now a member of Oozing Goo - The Lava Lamp Syndicate
Thursday

GooHeads

© 2025   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service