Oozing Goo - The Lava Lamp Syndicate

Very elegant ,one of my favorite.

Views: 119

Comment

You need to be a member of Oozing Goo - The Lava Lamp Syndicate to add comments!

Join Oozing Goo - The Lava Lamp Syndicate

Comment by Arne on July 3, 2021 at 4:59pm

Ok I guess when it was made conical washers didnt exist and they made them from nuts as they dont seem to be very symetrical.

Thanks a LOT for al the info and the effort to take the measurments!! I will let you know how it turned out :)

Comment by pascal on June 30, 2021 at 2:29am

Arne,

They are screwed, you can see it on the picture, and be aware: bottom is 21,2cm large x2,5cm height (quite heavy) Cosmos is only 1,6cm height

Comment by Arne on June 28, 2021 at 2:45pm

Thanks a lot!! finally I can try to build one of my holy grail lamps! one last question if you dont mind...are those conical washers at each end of the rods threaded and screwed to the rod or are they just sitting there without any thightening to the rod/rectangular part? Again thank yu very very much, I'm waiting to do this for years and now I finally have the missing infos :)

Comment by pascal on June 28, 2021 at 11:30am

Hi Arne

The bottom plate is 21,2cm, rectangular parts is 10,5cm and bottom is cover with felt.

Comment by Arne on June 28, 2021 at 4:28am

Could you also show me a picture of the bottom of the lamp and pretty please give me the measures of the bottom plate and the rectangular parts? thank you :)

Comment by Arne on June 28, 2021 at 4:24am

Ohh I had never guessed it's made like this! thank you so much!!!

Comment by pascal on June 20, 2021 at 9:25am

Hi Arne the upper bar is made of two rectangular partsIMG_1626.jpg

Pascal

Comment by Arne on June 20, 2021 at 8:00am

Hey Pascal, is the upper bar with the lamp socket on top round or rectangular?

thanks

Arne

Comment by Modulo '70 on April 21, 2021 at 3:46pm

Would love one of these.

About

Autumn created this Ning Network.

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service