Oozing Goo - The Lava Lamp Syndicate

Good Afternoon

Hoping that someone could give me some advice as to how to fix my lamp. The wax stays up at the top. I have a 40 watt bulb and I ran it your over 4 hours with no luck. I would appreciate any input I could get as to how to fix this problem.

Thanks Much 

Views: 129

Attachments:

Reply to This

Replies to This Discussion

We have a subforum for questions like this. You might get more responses there.

Sorry, was out on a personal

"Fear and Loathing" experience in Wisconsin.
:) :) 

Obvious reasons for a century are:
is it under a window or any other airflow?

Is the heat shield in place ??  (Very important)
Are all the filament on the light bulb intact?

Are you in direct sunlight?
Have you witnessed go from room temp- to 125 deg? (i
Basically, have you witnessed to get hot allthe way through the tempature ranges untiloverheat stage set in

It should be noted that only the 1990s Century models have the heat shield.

Thank you

Jonas Clark-Elliott said:

We have a subforum for questions like this. You might get more responses there.

Appreciate information!

Claude J said:

Sorry, was out on a personal

"Fear and Loathing" experience in Wisconsin.
:) :) 

Obvious reasons for a century are:
is it under a window or any other airflow?

Is the heat shield in place ??  (Very important)
Are all the filament on the light bulb intact?

Are you in direct sunlight?
Have you witnessed go from room temp- to 125 deg? (i
Basically, have you witnessed to get hot allthe way through the tempature ranges untiloverheat stage set in

Reply to Discussion

RSS

About

Autumn created this Ning Network.

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service