Oozing Goo - The Lava Lamp Syndicate

I have 3 Grande Lava lamps.

I replaced the bulbs with 130 volt R20 bulbs but found that the lava was not as lively as before. I did some research and found that the 130v has a thicker filament and burns cooler than 120v.

I am ordering some 120v and will verify my hypothesis.

Views: 223

▶ Reply to This

Replies to This Discussion

Reporting that one should always use a 120v bulb in the Grande Lava. The flow improved and lamp is back to normal after using 130v for way too long.

While you will probably extend bulb life running a 130v/100w for a grande, the wattage drops a decent amount when running it at 120v for sure. Somewhere buried in threads here there were some calculations being made on wattage drop when running 130v bulbs in 120v appliances.

▶ Reply to Discussion

RSS

GooHeads

© 2026   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service